VICLAN-LOGO

VICLAN V-SMGW-A1 Sensor

VICLAN-V-SMGW-A1-Sensor-PRODUCT

Mga Detalye sa Produkto

  • Modelo sa Produkto: SensorV-SMGW-A1
  • Power Supply: 5V 1A adapter
  • Pamaagi sa Komunikasyon: Bluetooth sa WiFi
  • Brand sa Bluetooth Chip: NRF
  • Kasangkaran sa Komunikasyon: 100m / 325 p

MGA DETALYE SA PRODUKTO

STEP INTO THE PRODUCT DETAILS DISPLAY, EMBARK ON AN IMMERSIVE PRODUCT JOURNEY, AND DISCOVER EVERY SHINING POINT OF THE BELOVED ITEM!VICLAN-V-SMGW-A1-Sensor-fig-1

DISPLAY FRONTALLY
AP7’2: 74 * 71 * 27MM, BLACK AND WHITE, AVAILABLE IN TWO STYLES WITH AND WITHOUT MESH. It can BE USED AS A WIRELESS ROUTER CASING AND AS A JUNCTION BOX.VICLAN-V-SMGW-A1-Sensor-fig-2

INTERNAL DISPLAY
ACCESSORIES: UPPER SHELL/LOWER SHELL/LIGHT GUIDE COLUMN/BUTTONS/4 SCREWS/4 FOOT PADS

modelo AP70 There is a network port/ AP72B No internet port
Gidak-on 74*71*27mm
Kolor white/black color or can be customized
accessory Upper shell/lower shell/light guide column/buttons/4 screws/4 foot pads
AP72 interface TPY-C, Reset hole, light hole, internet port
AP72B interface  TPY-C, Reset hole, light hole
 MOQ  1 pcs
 Bayad  Paypal & TT & Wechat &Cash&Alipay
 Panahon sa paghatud  3-5 Working Days

VICLAN-V-SMGW-A1-Sensor-fig-3

Mga Dimensyon ug Timbang

  • Mga sukat: 70 × 70 × 25 mm
  • Timbang: 56 gramos

Kaangayan sa Kalikopan

  • Sakop sa Pagsukod sa Temperatura: -40 hangtod 194 (-40 hangtod 90)
  • Sakup sa Pagsukod sa Humidity: 10% ngadto sa 90%

Indicator Lights

Kolor Posisyon Kahulugan Mga nota
Berde Wala 1 Power Indicator Kanunay nga on kon powered
Berde Wala 2 Tigpakita sa Network Nagkidlap sa panahon sa koneksyon
Pula Wala 3 Alarm Indicator Kanunay nga i-on kung alarming

Mga Butang ug Buzzer Function

  • I-reset sa Mga setting sa Pabrika: Press and hold for more than 5 seconds, then short-press to confirm.
  • Tin-aw nga Alarm: Press the button during an alarm.
  • Alarm sa Sensor: Buzzer sounds and alarm light turn on when triggered.

Mga Kalihokan sa App

  1. Setup sa Koneksyon:
    1. Power on the gateway, enable Bluetooth on your phone, and open the app.
    2. Select the sensor, scan the QR code on the gateway, and wait for successful pairing.
    3. If the QR code cannot be scanned, use Nearby Devices to automatically add the gateway.
    4. Usba ang ngalan sa device ug kompletoha ang setup.
  2. Mga setting:
    • I-tap ang Settings sa home page aron view basic device information, set data push intervals, restore factory settings, and view konektado nga mga himan.

Kanunay nga Gipangutana nga mga Pangutana

P: Ngano dili nako mahimo view data sa temperatura ug humidity sa layo?
A: Check if your gateway is bound to any devices. Check the device’s network status. Check your home WiFi signal.

P: Nganong dili nako makonektar ang gateway sa akong home WiFi?
A: Make sure the WiFi network is 2.4GHz. This product does not support 5GHz networks at this time.

Mga Dokumento / Mga Kapanguhaan

VICLAN V-SMGW-A1 Sensor [pdf] Manwal sa Gumagamit
SRNM9Q, V-SMGW-A1 Sensor, V-SMGW-A1, Sensor

Mga pakisayran

Pagbilin ug komento

Ang imong email address dili mamantala. Ang gikinahanglan nga mga natad gimarkahan *