Qoltec 1D 2D Barcode ug QR Code Reader Scanner

Mga detalye

• Manufacturer: NTEC sp. z oo
• Sertipikasyon: sertipikado sa CE
• Gituyo nga Paggamit: Pagbasa ug pag-scan sa lainlaing mga code

The following list of safety warnings has been compiled by the requirements of the General Product Safety Regulation (EU) 2023/988 (GPSR). Its purpose is to protect users from potential hazards arising from the misuse of products. The warnings have been formulated simply and understandably to be accessible to a wide audience, including the elderly and people with reduced mobility. The code readers on offer from the manufacturer NTEC sp. z o.o. are CE certified, which proves their compliance with EU safety standards. Use code readers according to their intended use and the manufacturer’s instructions and recommendations.

Mga Pasidaan sa Kaluwasan

• Always follow the safety warnings and precautions provided to you
• Ensure safe usage of the code readers.

BASIC HAZARDS UG MGA PANAN-AW

1. Mga risgo sa mekanikal
   • Damage to the reader housing as a result of dropping, especially on models without adequate shock protection.
   • Wear or damage to the scan button occurs under heavy use.
2. Risgo sa sobrang kainit:
   • Intensive use of the reader in continuous mode can lead to overheating of the device and its failure.
   • Using the reader in high ambient temperatures may shorten its lifespan.
3. Ergonomic risks:
   • Prolonged use of handheld readers can lead to fatigue or wrist injury.
     ESPEPISYONG MGA KILIGTAS NGA MATUWANG GIKAN SA PAGGAMIT
4. Reading quality risk:
   • Problems reading codes if the reader’s protective glass is dirty or damaged.
   • Difficulty reading codes in low light (mainly applies to 1D readers without additional backlighting).
   • Limitations on reading low-contrast or damaged codes.
5. Mga risgo sa pagkaangay:
   • Incompatibility of the reader with the operating system or software in use may limit its functionality.
   • Connection problems occur when using wireless readers in environments with high levels of radio interference.
6. Power supply risk:
   • For wireless readers, insufficient battery capacity can lead to downtime.
   • Improper charging of batteries (e.g., use of non-original chargers) can lead to battery damage.
7. Risk of damage to optics:
   • Dirt or scratches on the lenses or protective glass can reduce the quality of code reading.
   • Exposure to intense sunlight can interfere with the optical sensors.

MGA PAGPAHIMANGNO SA MAINTENANCE

Paglimpyo

• Clean the reader with a soft cloth. Do not use water or aggressive chemicals.
• Make sure the equipment is unplugged before cleaning.

Pag-monitor sa kahimtang

• Regularly check connectors and cables for signs of wear, corrosion, or mechanical damage.
• If you notice problems with reading codes or unusual behaviour of the device, stop using it immediately and contact the service centre.

Pagtipig

• Storing the reader in a humid or dusty environment can lead to corrosion of internal components.
• Exposure to extreme temperatures can damage the electronics of the reader.

DUGANG MGA WARNING

Kaluwasan sa bata
Keep the reader and cables out of the reach of children to prevent misuse.

Likayi ang mga kausaban
Do not attempt to modify or repair the reader yourself in order not to compromise its functionality and security.

Actions in the event of an emergency

• If the product exhibits abnormal operation, such as unusual odour, appearance, or sounds, stop using it immediately and contact the service department.
• Kung makakita ka ug bisan unsang dili luwas nga pamatasan sa produkto, kontaka dayon ang tiggama.

ANG IMPORTANTE SA PAGSUNOD SA MGA WARNING
Ang pagsunod sa mga pasidaan sa ibabaw makapamenos sa risgo sa personal nga kadaot, pagkapakyas sa kagamitan, ug kadaot sa kabtangan. Ang dili pagtagad sa mga rekomendasyon mahimong mosangpot sa seryoso nga panglawas ug materyal nga mga risgo. Hupti nga luwas ang imong kaugalingon ug ang imong mga minahal sa kinabuhi pinaagi sa pag-obserbar sa mga pag-amping nga gipakita.

Panguna nga mga Peligro ug Pag-amping

1. Mga Risgo sa Mekanikal:
   • Pagdumala sa pag-amping aron malikayan ang kadaot gikan sa pagkahulog.
   • Avoid heavy use of the scan button to prevent wear or damage.
2. Risgo sa Overheating:
   • Likayi ang padayon nga intensive nga paggamit aron malikayan ang sobrang kainit.
   • Likayi ang paggamit sa taas nga temperatura sa palibot.
3. Ergonomic nga mga Risgo:
   • Take breaks during prolonged use to prevent fatigue or wrist strain injury.

PRODUCER
Ang NTEC sp. z oo
44B Chorzowska Street
44-100 Gliwice
POLAND
info@qoltec.com
tel: +48 32 600 79 89

Mga FAQ

Q: What should I do if the reader is not reading the codes husto?
A: Ensure the protective glass is clean and undamaged. If issues persist, contact the service center for assistance.

P: Unsaon nako pagtipig ang magbabasa kung wala gigamit?
A: Store the reader in a dry and clean environment away from extreme temperatures to prevent damage.

Mga Dokumento / Mga Kapanguhaan

Qoltec 1D 2D Barcode ug QR Code Reader Scanner [pdf] Manwal sa Instruksyon 1D 2D 50867, 1D 2D Barcode ug QR Code Reader Scanner, Barcode ug QR Code Reader Scanner, QR Code Reader Scanner, Reader Scanner, Scanner

Mga pakisayran

• Manwal sa Gumagamit