IDEC FC6A-J8A1 8pt Voltage Giya sa Gumagamit karon nga Input Mod

IDEC FC6A is a multifunctional PLC equipped with powerful IoT capabilities, all within compact hardware.
It supports the MQTT protocol, allowing the PLC to connect to MQTT brokers and cloud services. Additionally, it features a dedicated user interface for connecting to AWS IoT Core, enabling PLC programmers to easily establish communication between the PLC and AWS IoT Core.
This guide explains how to connect the IDEC FC6A Plus PLC to AWS IoT Core.

Deskripsyon sa Hardware

Datasheet/Brochure
https://us.idec.com/idec-us/en/USD/Programmable-Logic-Controller/Micro-PLC/FC6A-MicroSmart-PLC/c/MicroSmart_FC6A?page=1

Mga butang nga Gihatag sa Gumagamit
The package for the FC6A Plus CPU unit includes only the CPU unit and the I/O terminal block. Please note that you will need to provide a USB cable (USB-A to USB Mini-B) and a 24V power supply separately.

3rd party nga mapalit nga mga butang
Wala

I-set up ang Imong Development Environment

Pag-instalar sa mga himan (IDE, Toolchain, SDK)
WindLDR software is required to program the PLC application. IDEC offers the Automation Organizer suite, which includes the WindLDR software. The part number for purchasing Automation Organizer is SW1A-W1C. Please check with an IDEC distributor or an authorized online retailer.
https://us.idec.com/idec-us/en/USD/Software/Automation-Organizer/p/SW1A-W1C

Set Up Device Hardware

<Power Supply>
The IDEC FC6A Plus requires a 24V DC power supply. Connect the 24V power supply unit to the connector on the FC6A.
<Internet Connection>
The FC6A Plus has two Ethernet ports. Port 1 is located on the upper side, and Port 2 is on the lower side of the unit. To connect to AWS IoT Core, use Port 1 (upper side).

Set up your AWS account and permissions

If you do not have an existing AWS account and user, refer to the online AWS documentation titled “Set Up Your AWS Account.” To get started, follow the steps outlined in the sections below:

Pag-sign up alang sa usa ka AWS account
Paghimo og administratibong tiggamit
Open the AWS IoT Console

Paghimo AWS IoT Resources

Refer to the online AWS documentation at Create AWS IoT Resources. Follow the steps outlined in the sections below to provision resources for your device:

Create an AWS IoT policy
Create a Thing object

Ihatag ang Device nga adunay mga Kredensyal

Refer to pages 12 and 18 in the following document.
These sections explain how to download the Root (Server) CA, the certificate file for the FC6A, and the private key file, as well as how to import them into the FC6A.

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTTAWSIoTCoreTraining.pdfcontext=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Build the Demo

Refer to pages 1 to 22 in the following document. These pages explain how to connect the FC6A to AWS IoT Core. Follow the step-by-step tutorial to complete the connection process.

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Pagdalagan ang Demo
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.

I-verify ang mga mensahe sa AWS IoT Core

Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Pag-troubleshoot

Refer to page 33 in the following document, which details the MQTT connection error codes.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

For more information, please refer to the AWS online documentation on Troubleshooting AWS IoT.

Kanunay nga Gipangutana nga mga Pangutana

What is the power supply requirement for IDEC FC6APlus?

The IDEC FC6A Plus requires a 24V DC power supply.

Where can I find the necessary software for programming the PLC application?

You can install WindLDR software from the Automation Organizer suite, available for purchase with part number SW1A-W1C.

Which Ethernet port should be used for connecting to AWS IoT Core?

Port 1 (upper side) of the FC6A Plus should be used for connecting to AWS IoT Core.

Mga Dokumento / Mga Kapanguhaan

IDEC FC6A-J8A1 8pt Voltage Kasamtangang Input Mod [pdf] Giya sa Gumagamit
FC6A-J8A1 8pt Voltage Current Input Mod, FC6A-J8A1, 8pt Voltage Current Input Mod, Voltage Current Input Mod, Current Input Mod, Input Mod, Mod

Mga pakisayran

Manwal sa Gumagamit

IDEC FC6A-J8A1 8pt Voltage Kasamtangang Input Mod

Tapos naview