TRS10-UB
Bundle for Microsoft Teams Rooms
Essential Setup Instructions

Important:  Before activating and using your TRS10 or TRS10-UB system, please make sure the following connections are made.

Pre-Installation Checklist

Before you begin:

1. Check Inventory
   Ensure you have all the necessary components:
   • MPC310-W31-TU Conferencing PC
   • MRC1010-TN Touch Console
   • USB Type C cable
   • RJ-45 Ethernet (LAN) cable
   • Power cord
2. Verify Internet Access
   Confirm that a reliable internet connection is available at the installation site.

USB Connection

Connect the USB Type C cable from the MPC310-W31-TU Conferencing PC to the MRC1010-TN Touch Console.

Internet Connection

Connect the Ethernet RJ-45 LAN cable from the Conferencing PC to the Internet.

Turn On
Important:  An active internet connection is required before turning on the Conferencing PC.
Turn on the MPC310-W31-TU Conferencing PC.

Support and Troubleshooting

• If you encounter issues during installation, double-check cable connections and ensure power outlets are working.
• For further assistance, refer to the product’s support documentation or contact ViewSonic’s technical support team.

Documents / Resources

CDW TRS10-UB Bundle for Microsoft Teams Rooms [pdf] Instruction Manual MPC310-W31-TU, MRC1010-TN, TRS10-UB Bundle for Microsoft Teams Rooms, TRS10-UB, Bundle for Microsoft Teams Rooms, Microsoft Teams Rooms

References

• User Manual