EL.RTL8733BU-CWFT Dual Band Wi-Fi 4 11n plus BT5.2 Module
“
Specifications
- Model: EL.RTL8733BU-CWFT
- Product Name: WLAN 11a/b/g/n 1T1R + BT5.2 module
- Major Chipset: RTL8733BU-CG
- Standard: 802.11a/b/g/n
- Modulation Method: BPSK/ QPSK/ 16-QAM/64-QAM
- Frequency Band:
- WiFi: 2.4GHz/5GHz
- BT Interface: USB2.0
- Humidity: 5% to 90% maximum
- Dimension: (not specified)
Product Usage Instructions
1. Overview
The EL.RTL8733BU-CWFT is a highly integrated 802.11a/b/g/n 1T1R
WLAN and Bluetooth 5.2 combo chip. It provides a complete solution
for high throughput performance integrated wireless LAN and
Bluetooth.
2. Features
- IEEE 802.11b/g/n compatible WLAN
- 802.11a/b/g/n 1T1R WLAN and Bluetooth single chip
- Complies with USB 2.0 for WLAN
- Complete 802.11n solution for 2.4GHz band
- Maximum data rate: 54Mbps in 802.11g, and 150Mbps in
802.11n - Security support for WPA/WPA2, open, shared key, and pair-wise
key authentication services - Compatible with Bluetooth v2.1+EDR and v5.2 systems
- Supports Bluetooth 4.0 Low Energy (BLE)
3. Block Diagram
(Block diagram not provided in the text excerpt)
4. General Specification
(General specifications are detailed in the text excerpt)
5. RF Specification
(RF specifications are detailed in the text excerpt)
FAQ
Q: What is the maximum data rate supported by the
EL.RTL8733BU-CWFT?
A: The maximum data rate supported is 150Mbps in 802.11n.
Q: What security features are supported by the product?
A: The product supports WPA/WPA2, open, shared key, and
pair-wise key authentication services.
“`
SPECIFCATION
EL.RTL8733BU-CWFT
CDT P/NCDW-F7733BU-00
Dual-band WiFi4 11n + BT5.2 Module Spec
Software
Customer
Approve
Date
Design
Check
Approve
Version
V1.2
Date
2025.05.30
CHINA DRAGON TECHNOLOGY LIMITED
B4 (86 755) 81449957 (86 755) 81449967 E-mail: Info@cdtech.cn Http://www.cdtech.cn
Reversion History
Version
Date
1.0
2025.03.22
1.1
2025.04.18
1.2
2025.05.30
WiFi Module EL.RTL8733BU-CWFT
Modification First release Update package Update package
Page 1
WiFi Module EL.RTL8733BU-CWFT
1. Overview
The EL.RTL8733BU-CWFT is a highly integrated 802.11a/b/g/n 1T1R WLAN and Bluetooth 5.2 combo chip It combines a WLAN MAC, a 1T1R capable WLAN baseband,BT Protocol Stack(LMLL,and LE), BT Baseband, modem,and WLAN/BT RF in a combo chip.The EL.RTL8733BU-CWFT provides a complete solution for a high throughput performance integrated wireless LAN,and Bluetooth.
2.Features
IEEE 802.11b/g/n compatible WLAN802.11a/b/g/n 1T1R WLAN and Bluetooth single chip
Complies with USB 2.0 for WLAN Complete 802.11n solution for 2.4GHz band Maximum data rate 54Mbps in 802.11g; and 150Mbps in 802.11n Security support for WPA/WPA2. Open, shared key, and pair-wise key authentication services
Compatible with Bluetooth v2.1+EDR and v5.2 Systems Supports Bluetooth 4.0 Low Energy(BLE) PCM interface for audio data transmission via Bluetooth controller Supports multiple Low Energy states
Page 2
3.Block Diagram
WiFi Module EL.RTL8733BU-CWFT
4.General Specification
Model
EL.RTL8733BU-CWFT
Product Name
WLAN 11a/b/g/n 1T1R + BT5.2 module
Major Chipset
RTL8733BU-CG
Standard
802.11a/b/g/n
Modulation Method
BPSK/ QPSK/ 16-QAM/64-QAM
Frequency Band WiFi/BT Interface
2.4GHz/5GHz WifiUSB2.0
BTUSB2.0
Operating Temperature -20° C ~ 65° C
Storage Temperature -40° C ~ 85°C
Humidity
5% to 90% maximum
Dimension
21.0×15.0x2.4 (LxWxH) ±0.2mm
Page 3
WiFi Module EL.RTL8733BU-CWFT
5.RF Specification
5.1wifi Specification A.2.4GHz RF Specification
Feature
Description
WLAN Standard
IEEE 802.11b/g/n WiFi compliant
Frequency Range
2.400 GHz ~ 2.4835 GHz (2.4 GHz ISM Band)
Modulation Receive
802.11b : DQPSK, DBPSK, CCK 802.11 g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK – 1Mbps PER @ -95 dBm, typical
Sensitivity (11b,20MHz)
@8% PER
– 2Mbps – 5.5Mbps – 11Mbps
PER @ -93 dBm, typical PER @ -90 dBm, typical PER @ -87 dBm, typical
– 6Mbps PER @ -90 dBm, typical
Receive Sensitivity (11g,20MHz) @10% PER
– 9Mbps – 12Mbps – 18Mbps – 24Mbps – 36Mbps
PER @ -89 dBm, typical PER @ -88 dBm, typical PER @ -85 dBm, typical PER @ -82 dBm, typical PER @ -79 dBm, typical
– 48Mbps PER @ -74 dBm, typical
– 54Mbps PER @ -72 dBm, typical
– MCS=0
PER @ -90 dBm, typical
– MCS=1
PER @ -87 dBm, typical
Receive Sensitivity (11n,20MHz) @10% PER
– MCS=2 – MCS=3 – MCS=4 – MCS=5 – MCS=6
PER @ -85 dBm, typical PER @ -81 dBm, typical PER @ -78 dBm, typical PER @ -73 dBm, typical PER @ -72 dBm, typical
– MCS=7
PER @ -70 dBm, typical
– MCS=0
PER @ -87 dBm, typical
– MCS=1
PER @ -84 dBm, typical
Receive Sensitivity (11n,40MHz) @10% PER
– MCS=2 – MCS=3 – MCS=4 – MCS=5 – MCS=6
PER @ -82 dBm, typical PER @ -79 dBm, typical PER @ -75 dBm, typical PER @ -71 dBm, typical PER @ -69 dBm, typical
– MCS=7
PER @ -68 dBm, typical
Page 4
Maximum Input Level
802.11b : -10 dBm 802.11g/n : -20 dBm
WiFi Module EL.RTL8733BU-CWFT
B.5GHz RF Specification
Feature
Description
WLAN Standard Frequency Range Number of Channels
Modulation
IEEE 802.11a/n WiFi compliant
5.0 GHz ISM Band 5.0GHzPlease see the table
802.11a : OFDM /64-QAM,16-QAM, QPSK, BPSK 802.11n : OFDM /64-QAM,16-QAM, QPSK, BPSK
– 6Mbps PER @ -89 dBm, typical
– 9Mbps PER @ -88 dBm, typical
– 12Mbps PER @ -87 dBm, typical
Receive Sensitivity
– 18Mbps PER @ -84 dBm, typical
(11a,20MHz) @10% PER
– 24Mbps – 36Mbps
PER @ -81 dBm, typical PER @ -78 dBm, typical
– 48Mbps PER @ -73 dBm, typical
– 54Mbps PER @ -72 dBm, typical
– MCS=0
PER @ -89 dBm, typical
– MCS=1
PER @ -86 dBm, typical
– MCS=2
PER @ -84 dBm, typical
Receive Sensitivity
– MCS=3
PER @ -81 dBm, typical
(11n,20MHz) @10% PER
– MCS=4 – MCS=5
PER @ -77 dBm, typical PER @ -72 dBm, typical
– MCS=6
PER @ -71 dBm, typical
– MCS=7
PER @ -68 dBm, typical
– MCS=0
PER @ -86 dBm, typical
– MCS=1
PER @ -83 dBm, typical
– MCS=2
PER @ -81 dBm, typical
– MCS=3
PER @ -78 dBm, typical
Receive Sensitivity
(11n,40MHz) @10% PER
– MCS=4 – MCS=5 – MCS=6
PER @ -74 dBm, typical PER @ -70 dBm, typical PER @ -68 dBm, typical
– MCS=7
PER @ -67 dBm, typical
Maximum Input Level 802.11a/n/ac : -20 dBm
Page 5
1.1 5GHz(20MHz) Channel table
Band (GHz)
Operating Channel Numbers 36
5.15GHz~5.25GHz
40
44
48
52
5.25GHz~5.35GHz
56
60
64
100
104
108
112
5.5GHz~5.7GHz
116
132
136
140
149
153
5.725GHz~5.825GHz
157
161
165
WiFi Module EL.RTL8733BU-CWFT
Channel center frequencies(MHz)
5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5660 5680 5700 5745 5765 5785 5805 5825
Page 6
5.3 BT Specification Feature General Specification Bluetooth Standard Host Interface Frequency Band Number of Channels Modulation RF Specification
Sensitivity @ BER=0.1% for GFSK (1Mbps) Sensitivity @ BER=0.01% for /4-DQPSK (2Mbps) Sensitivity @ BER=0.01% for 8DPSK (3Mbps)
Maximum Input Level
WiFi Module EL.RTL8733BU-CWFT
Description
Bluetooth 2.1/3.0/5.2 USB 2402 MHz ~ 2480 MHz 79 channels FHSS, GFSK, DPSK, DQPSK
Min.
Typical. -86 dBm
-86 dBm
-80 dBm
GFSK (1Mbps):-20dBm /4-DQPSK (2Mbps) :-20dBm 8DPSK (3Mbps) :-20dBm
Max.
6.Electrical Characteristics
symbol VCC VCC VOH VOL
Parameter 3.3V supply voltage 3.3V rating current output high Voltage output low Voltage
Minimum 3.0 -2.97 0
Typical 3.3 —-
Maximum 3.6 1000 3.3 0.33
Units V mA V V
Page 7
WiFi Module EL.RTL8733BU-CWFT
7.Pin Description & Module size (unit: mm)
15.00
1.00
3.00
15
1 12
3
4.50
1.20
21.00
12.70
11.33
4
11
2.25
1.50
2.40 1.00
NO.
Symbol
Description
1
GND
Ground connections
2
BT_RF
Bluetooth RF output
3
GND
Ground connections
4
RESET
System reset,low active
5
WOW
Wake up system via wifi,low active
6
BT_WAKE_HOST Wake up system via BT,low active
7
GND
Ground connections
8
DM
USB negative differential data lines
9
DP
USB positive differential data lines
10
GND
Ground connections
11
VCC
Power supply 3.3V
Page 8
12
NC
13
GND
14
NC
15
GND
NC Ground connections NC Ground connections
WiFi Module EL.RTL8733BU-CWFT
8. Footprint Dimensions
(Unit: mm)
1.80 R0.50
1.20
4.50
21.00 11.33
12.70
1.50
2.25 15.00
Top view
Page 9
WiFi Module EL.RTL8733BU-CWFT
9. Suplier
Material name Crystal
Inductance Wifi IC
Capacitance Resistance
Diplexer PCB
Secondary supplier list Supplier brand
JWT/FK/TKD/ECEC Sunlord/ DARFON/CHILISIN/DELI/Walsin/Murata
Realtek SAMSUNG /EYANG/ Walsin/Murata
UniOhm /YAGEO ACX/GLEAD/Sunlord/Walsin
A,I,O,S,D,P,T
10. Physical photo
TOP VIEW Dimension:21.0*15.0*2.4mm (LxWxH) ±0.3mm
BOTTOM VIEW
Page 10
WiFi Module EL.RTL8733BU-CWFT
11. Recommended Reflow Profile
Referred IPC/JEDEC standard. Peak Temperature : 50°C Number of Times : 2 times
217
Slope: 1~2/sec max. (217 to peak)
peak:
245
+0 -5
Prehe at: 150~200
Ramp down rate: Max. 2.5/sec
25
60~120 sec
Ramp up rate: Max. 2/sec
40~60 sec Time(sec)
Page 11
12. Packing information
48±2mm
WiFi Module EL.RTL8733BU-CWFT
Vacuum packing
AL BAG ANTI-STATIC
Color of plastic disc: blue A roll of 1000pcs(20pcs)
inner box K3K: 33.5cm*34.7cm*7cm A box of 1000 PCS
carton K=A: 36.4*35.7*37.5cm A case of 5000 PCS
ESD CAUTION The EL.RTL8733BU-CWFT is ESD (electrostatic discharge) sensitive device and may be damaged with ESD or spike voltage. Although EL.RTL8733BU-CWFT is with built-in ESD protection circuitry, please handle with care to avoid the permanent malfunction or the performance degradation.
Page 12
WiFi Module EL.RTL8733BU-CWFT
FCC WARNING FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
15.105 Information to the user. (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. The final end product must be labelled in a visible area with the following: “Contains Transmitter Module FCC ID: 2AWY6-ERT8733BUCT”
Page 13
WiFi Module EL.RTL8733BU-CWFT
Requirement per KDB996369 D03
2.2 List of applicable FCC rules
List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies. DO NOT list compliance to unintentional-radiator rules (Part 15 Subpart B) since that is not a condition of a module grant that is extended to a host manufacturer. See also Section 2.10 below concerning the need to notify host manufacturers that further testing is required.3 Explanation: This module meets the requirements of FCC part 15C(15.247), FCC Part15 15.407.
2.3 Summarize the specific operational use conditions
Provide all the restrictions imposed by the specific rule(s), that extend to host’s and any other notices or regulatory statements require in host’s end-user manual. For example, the rule that restricts use to indoor operation, not operated on aircraft, etc. Explanation: Equipment operating within the frequency band of 5150-5350MHz is for indoor use only
Also describe conditions that are applicable to the modular transmitter, such as including for example any limits on antennas. For example, if point-to-point antennas are used that require reduction in power or compensation for cable loss, for professional installed equipment, then this information must be in the instructions. In addition, certain information may also be needed, such as peak gain per frequency band and minimum gain, specifically for master devices in 5 GHz DFS bands. Explanation: The EUT has PCB antenna, the module contains 2 permanently attached antennas. See antenna report for antenna details.
2.4 Limited module procedures The Grantee of a limited module must file with the application for certification a procedure[6] that describes the proposed method used to ensure host compliance when the limited module is installed in the host product. If a modular transmitter is approved as a “limited module,” then the module manufacturer is responsible for approving the host environment that the limited module is used with. The manufacturer of a limited module must describe, both in the filing and in the installation instructions, the alternative means that the limited module manufacturer uses to verify that the host meets the necessary requirements to satisfy the module limiting conditions. A limited module manufacturer has the flexibility to define its alternative method to address the conditions that limit the initial approval, such as: shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation. The alternative method could include that the limited module manufacturer reviews detailed test data or host designs prior to giving the host manufacturer approval. The Grantee can devise a strategy to be approved through a Pre-Approval Guidance (KDB Publication 388624 PAG item MODLIM ) inquiry This limited module procedure is also applicable for RF exposure evaluation when it is necessary to demonstrate compliance in a specific host. The module manufacturer must state how control of
Page 14
WiFi Module EL.RTL8733BU-CWFT
the product into which the modular transmitter will be installed and maintained such that full compliance of the product is always ensured. For additional hosts other than the specific host originally granted with a limited module, a Class II permissive change is required on the module grant to register the additional host as a specific host also approved with the module. Explanation: The module is a single module.
2.5 Trace antenna designs If trace antenna designs are applicable, full-detail design specifications are required per D02 Module Q&A Question 11. For a modular transmitter with trace antenna designs, see the guidance in Question 11 of KDB Publication 996369 D02 FAQ Modules for Micro-Strip Antennas and traces. The integration information shall include for the TCB review the integration instructions for the following aspects: layout of trace design, parts list (BOM), antenna, connectors, and isolation requirements.4 a) Information that includes permitted variances (e.g., trace boundary limits, thickness, length, width, shape(s), dielectric constant, and impedance as applicable for each type of antenna); b) Each design shall be considered a different type (e.g., antenna length in multiple(s) of frequency, the wavelength, and antenna shape (traces in phase) can affect antenna gain and must be considered); c) The parameters shall be provided in a manner permitting host manufacturers to design the printed circuit (PC) board layout; d) Appropriate parts by manufacturer and specifications; e) Test procedures for design verification; and f) Production test procedures for ensuring compliance. The module grantee shall provide a notice that any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify the module grantee that they wish to change the antenna trace design. In this case, a Class II permissive change application is required to be filed by the grantee, or the host manufacturer can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application. Explanation: The module with PCB antenna designs, See antenna report for antenna details.
2.6 RF exposure considerations It is essential for module grantees to clearly and explicitly state the RF exposure conditions that permit a host product manufacturer to use the module. Two types of instructions are required for RF exposure information: (1) to the host product manufacturer, to define the application conditions (mobile, portable xx cm from a person’s body); and (2) additional text needed for the host product manufacturer to provide to end users in their end-product manuals. If RF exposure statements and use conditions are not provided, then the host product manufacturer is required to take responsibility of the module through a change in FCC ID (new application). Module Grantees are required to provide an RF exposure ( RFX) exhibit for CoU related to fixed, mobile or portable configurations, as defined §2.1091 and §2.1093, as well as per further specification in by KDB Publication 447498. This exhibit shall include an RF exposure compliance statement, as well as references to Maximum Permissible Exposure (MPE) or Specific Absorption Rate (SAR) test reports, as required per KDB 447498.
Page 15
WiFi Module EL.RTL8733BU-CWFT
Modules can only be used in a host for the conditions that it was granted for. To be used in any other way them granted, such as mobile to portable or with other transmitters simultaneously, requires additional evaluation, testing, or testing and Class 2 permissive change. Explanation: This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, this equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.” This module is designed to comply with the FCC statement, FCC ID is: 2AWY6-ERT8733BUCT.
2.7 Antennas For Part 15 and licensed CMRS Client devices a list of antennas included in the application for certification must be provided in the instructions. For modular transmitters approved as limited modules, all applicable professional installer instructions must be included as part of the information to the host product manufacturer. The antenna list shall also identify the antenna types (monopole, PIFA, dipole, etc. (note that for example an “omni-directional antenna” is not considered to be a specific “antenna type”)). For situations where the host product manufacturer is responsible for an external connector, for example with an RF pin and antenna trace design, the integration instructions shall inform the installer that unique antenna connector must be used on the Part 15 authorized transmitters used in the host product. The module manufacturers shall provide a list of acceptable unique connectors. Licensed (non-client station) Modules for a base, fixed station can be stated as conducted, and antenna data is not required when it is clear that the licensee is responsible for the applicable limits under the rules and or license. Explanation: The EUT has PCB antenna, the module contains 2 permanently attached antennas. See antenna report for antenna details.
2.8 Label and compliance information Grantees are responsible for the continued compliance of their modules to the FCC rules. This includes advising host product manufacturers that they need to provide a physical or e-label stating “Contains FCC ID” with their finished product. See Guidelines for Labeling and User Information for RF Devices KDB Publication 784748. Explanation: The host system using this module, should have label in a visible area indicated the following texts: “Contains FCC ID: 2AWY6-ERT8733BUCT”
2.9 Information on test modes and additional testing requirements5 Additional guidance for testing host products is given in KDB Publication 996369 D04 Module Integration Guide. Test modes should take into consideration different operational conditions for a stand-alone modular transmitter in a host, as well as for multiple simultaneously transmitting modules or other transmitters in a host product. The grantee should provide information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host. Grantees can increase the utility of their modular transmitters by providing special means, modes, or instructions that simulates or characterizes a connection by enabling a transmitter. This can
Page 16
WiFi Module EL.RTL8733BU-CWFT
greatly simplify a host manufacturer’s determination that a module as installed in a host complies with FCC requirements. Explanation: Can increase the utility of our modular transmitters by providing instructions that simulates or characterizes a connection by enabling a transmitter.
2.10 Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the grantee shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.6 Explanation: The module is only FCC authorized for the specific rule parts listed on the grant. The OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module installed. If the final product contains circuits of other FCC PART 15 Subparts, the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
2.11 Note EMI Considerations
Note that a host manufacture is recommended to use D04 Module Integration Guide recommending as “best practice” RF design engineering testing and evaluation in case non-linear interactions generate additional non-compliant limits due to module placement to host components or properties Explanation: The host manufacturer is strongly recommended to confirm compliance with FCC requirements for the transmitter when the module is installed in the host. This module is a stand-alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, the host manufacturer has to consult with the module manufacturer for the installation method in the end system. Host manufacturer is recommended to use D 04 Module Integration Guide. The final host product may also need to be evaluated against FCC rule part 15 Subpart B (criteria for unintentional radiators) in order to be properly authorized for operation as part 15B
2.12 How to make changes Since. only Grantees are permitted to make permissive changes, it is recommended that module manufactures provide contact information and some guidance to host providers in the integration instructions if they expect their module will be used differently than granted. Explanation: Module manufacturer contact: Tel: +86-15776493370, E-mail: yf.aggcs2@caixun.net.cn
Page 17
WiFi Module EL.RTL8733BU-CWFT
IC statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d’Innovation, Sciences etDéveloppement économique Canada. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pasproduire de brouillage,et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme auxCNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre lefonctionnement. Please notice that if the ISED certification number is not visible when the module is installed inside another device, then theoutside of the device into which the module is installed o display a label referring to the enclosed module. This exteriorlabel can use wording such as the following: “Contains IC: 26332-ERT8733BUCT” any similar wording that expresses the same meaningmay be used. l’appareil hôte doit porter une étiquette donnant le numéro de certification du module d’Industrie Canada, précédé des mots «Contient un module d’émission », du mot « IC: 26332-ERT8733BUCT » ou d’une formulation similaireexprimant le même sens, comme suit The device meets the exemption from the routine evaluation limits in section 6 of RSS-102 Issue 6 December 15, 2023 andcompliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure andcompliance. Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 6 de RSS-102 Issue 6 December 15, 2023 etla conformité à l’expositionde RSS-102 rf, utilisateurs peut obtenir l’information canadienne surl’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. This equipment should be installed and operated with a minimum distance of 20centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre antenne ouémetteur. Cet équipementdevrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.
Page 18
WiFi Module EL.RTL8733BU-CWFT
Operation of this device is restricted to indoor use only. (5150-5350MHz) Le fonctionnement de cet appareil est limité à un usage intérieur seulement. (5150-5350MHz)
a.The underlying product code enables the device to automatically stop transmitting when there is no information to transmit or when there is a malfunction. b.The use of a private network that allows only authenticated users to download softwareConfirm that a third party cannot reprogram the device.
Antenna information:
ANT Type
WIFI Antenna
PCB antenna
BT Antenna
PCB antenna
Manufacturer
Model
EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED
EL.RTL8733BU-C WFT
EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED
EL.RTL8733BU-C WFT
Peak Gain 2.4G BAND: -1.87dBi 5.1G BAND: 0.97dBi 5.3G BAND: 0.97dBi 5.6G BAND: 1.89dBi 5.8G BAND: 3.17dBi
-2.27dBi
Page 19
Documents / Resources
 |
Cdtech EL.RTL8733BU-CWFT Dual Band Wi-Fi 4 11n plus BT5.2 Module [pdf] Instruction Manual EL.RTL8733BU-CWFT Dual Band Wi-Fi 4 11n plus BT5.2 Module, EL.RTL8733BU-CWFT, Dual Band Wi-Fi 4 11n plus BT5.2 Module, Wi-Fi 4 11n plus BT5.2 Module, 4 11n plus BT5.2 Module, BT5.2 Module, Module |