Z-COM Manuals & User Guides
Z-COM develops wireless networking products, including Wi-Fi access points, wireless LAN controllers and embedded modules, for connected devices and managed networks.
About Z-COM manuals on Manuals.plus
Z-COM develops wireless networking products, including indoor and outdoor Wi-Fi access points, wireless LAN controllers and embedded wireless modules.
Browse manuals and installation guides for models such as AS240, SP230 and AC-720M. Match your exact model to find instructions for mounting, power connections, network setup and operating modes.
Additional documentation is available through the official Z-COM downloads page.
Z-COM manuals
Selected manuals from manuals+ curated for this brand.
zcom AC-720M 802.11ac Wireless LAN USB Module User Manual
zcom SP230 2×2 Dual Band 802.11ac Wave 2 Access Point User Guide
Z Com 11Mbps Wireless LAN CF Card User Manual
802.11g Wireless LAN PCI Adapter Quick Installation Guide
Z-Com AC-1027-I 802.11ac Indoor Access Point Quick Setup Guide
IEEE 802.11 Outdoor Wireless CPE User Manual (ZAC-1023, ZAC-503, ZWA-3090, ZN-7200 Series)
Z-Com AC-720M 802.11ac Wireless LAN USB Module User Manual
SP250 2x2 Dual Band Outdoor Access Point
SP420 4x4 dual Band 802.11ac Wave 2 Outdoor Access Point
SP220V2 2x2 Dual Band 802.11ac Wave 2 Outdoor Access Point
WS5-7-10G2 Wireless LAN Controller
AC-1028 In-Wall Plate Wi-Fi Access Point
WS200 Wireless LAN Controller
SP230 Series 2x2 Dual Band PtP/PrMP 802.11ac Wave 2 Outdoor Access Point
Z-COM support FAQ
Common questions about manuals, registration, and support for this brand.
-
Where can I find Z-COM manuals?
Browse this category by model number or visit Z-COM's official downloads page for user manuals and quick-start guides.
-
Which manual should I use for my access point?
Match the full model number on your device, including any suffix. For example, SP230 and SP230-S5 have different default operating modes and antenna specifications.
-
What is the difference between TAP and FAP mode?
The AS240 and SP230 guides describe TAP as controller-managed operation and FAP as standalone operation. Follow your model's guide before changing modes.
-
Where can I find Z-COM warranty information?
Refer to the official Z-COM warranty page for coverage and exclusions. It describes a conditional one-year warranty depending on the model, limited to the original end-user purchaser.
-
What should I check before powering a Z-COM access point?
Check your model's power and PoE requirements before connecting cables. The SP230 guide warns against connecting non-PoE devices to its LAN/PoE Out port.