ZAVE offers DIY electronics products, including ESP32 mini drone kits and Bluetooth audio receiver modules, for hands-on programming, STEM learning and audio projects.
ZAVE is associated with DIY electronics products, including ESP32 open-source mini drone kits and Bluetooth 5.0 audio receiver modules for programming, STEM learning and wireless audio projects.
Browse available instructions for assembly, firmware flashing, Wi-Fi setup, calibration, operation and troubleshooting. Always match the manual to your exact product model and kit version.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Available information includes instructions for an ESP32 open-source mini drone kit, identified as E1, and the MH-M18 Bluetooth 5.0 audio receiver module. Match documentation to your exact model.
The supplied instructions say to connect to XW_Drone_WiFi using password 12345678, then open http://192.168.4.1:8080 in a mobile browser. Calibrate before the first flight by selecting Debug, entering ca and following the prompts.
Verify that Device Manager recognizes the CH340 serial port and use a data-capable USB-C cable. If the port remains unavailable after driver installation, the instructions suggest trying another computer.
Follow the model-specific assembly instructions, confirm motor positions and propeller markings, and complete calibration. Incorrect propeller orientation can prevent flight. Keep initial test flights close to the ground.
Verified official support and registration pages are not available in the supplied information. Check the documentation and materials included with your product, or ask the seller for applicable support and warranty details.