XTEMP manufactures precision heating baths for heating and conditioning specimens in temperature-controlled liquids, with manuals covering setup, operation and care.
XTEMP Environments (Shanghai) Co., Ltd. manufactures precision heating baths for heating and conditioning specimens in temperature-maintained liquids.
Find operating instructions for models including UXP8001-WB090F/S, UXP8001-WB130F/S and UXP8001-WB250F/S, covering installation, controller settings, calibration, maintenance and safety.
Check your model number before using a manual and contact your distributor or supporting technician for unresolved questions.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The available operating instructions cover UXP8001-WB090F/S, UXP8001-WB130F/S and UXP8001-WB250F/S. Match the model number on your equipment before following instructions.
Chapter 2 covers installation and operation, while Chapter 3 explains controller settings, temperature control and calibration.
The manual recommends contacting your local distributor or supporting technician. It also lists the manufacturer's business contact at +86 21 6443 1641 and bc@xtemp-usa.cn.
The supplied manual prohibits silicone oil for this series because it can damage internal silicone rubber parts and cause leakage. Follow the model-specific liquid requirements and consult an XTEMP engineer about alternatives.
Consult the warranty section of the operating instructions and your purchase documents. The manual specifies intended use, approved original parts, no modifications and maintenance at the required intervals as conditions.