Winterwarm specializes in industrial and agricultural air heating solutions, producing gas-fired unit heaters, water heaters, and sustainable climate systems for large spaces.
Winterwarm Heating Solutions is a prominent manufacturer of industrial air heating systems with nearly 90 years of experience in the climate control industry. Based in the Netherlands, the company specializes in designing and producing high-efficiency heating equipment for industrial halls, warehouses, greenhouses, and agricultural poultry sheds.
Their product portfolio ranges from traditional gas-fired unit air heaters to modern electric heaters and water heaters, including the popular XR, HR, and DX series. Winterwarm places a strong emphasis on sustainability and energy efficiency, offering products that meet strict international standards.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
No, Winterwarm heaters must be installed and maintained by an authorized, qualified, and competent installer using calibrated equipment. Improper installation may void the warranty and cause safety hazards.
Generally, heaters should not be used in very dusty environments as accumulation can cause defects. However, specific agricultural models (like those for poultry sheds) can be used if cleaned and maintained frequently.
Regular maintenance is essential for safe operation. For agricultural environments, maintenance is recommended after every breeding cycle. For industrial settings, annual inspection and cleaning are typically advised.
Winterwarm water heaters must be protected from freezing. Frost can cause internal copper tubes in the heat exchanger to burst. If the unit is exposed to temperatures below 4°C, ensure the system is drained or protected, as freeze damage is not covered by warranty.
Most Winterwarm usage manuals indicate an IP20B classification (not waterproof) or IPX4D (splash-proof) depending on the model. Never use water to clean electrical parts and avoid exposing standard units to rain or spray.