Generic WiFi Repeaters and Extenders are designed to boost your wireless network coverage and eliminate dead WiFi zones in your home or office networking setup.
WiFi Repeaters, also known as range extenders, are networking devices designed to capture an existing wireless signal and re-broadcast it to expand coverage.
These generic or unbranded devices are commonly used to eliminate dead zones in homes or offices, ensuring stable connections for your smartphones, laptops, and smart home devices. Setup typically involves connecting to the default IP address (often 192.168.188.1) or using a WPS button for a quick one-touch connection to your primary router. Because many of these devices are produced generically, they share common configuration steps and default settings.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Open a web browser and enter the default IP address, which is typically 192.168.188.1 (though this can vary by model). The default username and password are usually 'admin'.
After logging into the setup page, scan for available networks, select your host router's name (SSID), enter your main WiFi password, and set your new extender SSIDs (often branded with a '-pro' or '-ext' suffix).
A green extender light indicates that the WiFi connection is in good condition, signifying a strong signal and effective range extension from your main router.
While the device is plugged in and powered on, press and hold the WPS/RESET button for about 10 seconds until all indicator lights turn off and back on.
If the extender light is not illuminated or indicates a poor connection, you need to adjust the position of the repeater. Move it closer to the main router to a location where the light turns green, ensuring a stronger backhaul connection.