WaterBoost specializes in high-performance whole-house mains water pressure booster systems and accumulator pumps for domestic and commercial applications.
WaterBoost is a leading manufacturer of innovative water boosting solutions designed to resolve low water pressure and flow issues in domestic, commercial, and light industrial settings. Their product lineup includes whole-house mains pressure boosters, variable speed inverter pumps, and sealed accumulator vessels.
Built to comply with stringent UK water and building regulations, WaterBoost units are WRAS approved and engineered for straightforward installation. Their systems operate as fully sealed closed circuits, making them ideal for use with pressurized, unvented, and combination boiler systems, ensuring that multiple outlets perform optimally even during peak demand.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The maximum flow rate is typically 12 litres/min directly from the mains to comply with water authority restrictions, but it can supply up to 80 litres/min when utilizing the accumulator flow.
No, WaterBoost systems must be installed in a dry, frost-protected internal location. They should not be exposed to high humidity, excessive condensation, or salt-laden environments.
A green LED indicates the pump is running or ready, a blue LED indicates standby or an active WiFi connection, and a red LED indicates a fault code that requires troubleshooting.
No, the ATX accumulator vessel is pre-pressurised at the factory. Unlike traditional accumulators, no manual air pre-charge setup is required prior to commissioning.
No, WaterBoost pumps should never be fitted immediately after a water softener, to hot water piping, or to communal risers.