WandererAstro makes motorized filter wheels, camera rotators, tilt adjusters, flat panels and dust covers to support automated telescope imaging and astrophotography.
WandererAstro develops accessories for automated astrophotography, including motorized filter wheels, camera rotators, electronic tilt and back focus adjusters, flat panels, and telescope dust covers.
Browse manuals for installation, compatibility, power requirements, software setup, calibration, and firmware updates. Always follow your model's limits for screw length, thread depth, and payload.
Visit the official WandererAstro website for software, or contact info@wandererastro.com for assistance.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for your exact product and model. Check the model name before following installation, power, or firmware instructions.
Visit the official website at https://www.wandererastro.com/. Many current devices use WandererEmpire, which includes relevant ASCOM drivers; older models may have separate driver instructions.
Email info@wandererastro.com. Include your product model, firmware version, control software, and a description of the problem.
Some WandererAstro devices require a CH340 USB serial driver. Check your model's manual and obtain the required driver from the official website. Also verify the USB connection and specified power supply.
Support depends on the product and firmware. Wanderer Eclipse supports compatible DC-switch control starting with firmware 20250404; ASIAIR Mini is not supported for this method. Follow your model's instructions.
WandererAstro has published an announcement extending the warranty for all its products to two years. Consult the official warranty announcement and contact the manufacturer to confirm applicable terms for your purchase.