ViHealth is a companion app for compatible Viatom health devices, helping users sync, store and review oxygen saturation and pulse readings from wearable monitors.
ViHealth is a mobile companion app for compatible Viatom health devices, used to sync and review oxygen saturation, pulse rate and monitoring records.
Browse manuals for devices used with ViHealth to find charging instructions, sensor placement guidance, Bluetooth setup, data syncing and troubleshooting. Always follow the manual for your exact model.
For hardware service or warranty questions, contact your device seller or local distributor.
Selected manuals from manuals+ curated for this brand.
![Wellue SPO2 Monitoring Ring User Manual [Bluetooth App Connection]](https://manuals.plus/wp-content/uploads/2020/11/Wellue-PO2-App-Ring-150x150.png)
Common questions about manuals, registration, and support for this brand.
Use the manual for your exact compatible device model. ViHealth is the companion app, and hardware features and instructions can differ between devices.
Find ViHealth in the iOS App Store or Google Play Store. If it is already installed, check the store for available updates.
The supplied manual says to turn on the device, enable Bluetooth on your phone and follow the connection instructions inside ViHealth. Do not pair this device through the phone's Bluetooth settings.
For the wearable oximeter described in the supplied manual, remove the device, wait for the recording countdown to finish and then open ViHealth to sync. Sessions shorter than two minutes are not saved, and its memory holds four sessions.
Contact your device seller or local distributor for hardware support and applicable warranty or registration requirements. No verified ViHealth-specific support or registration page is provided.