Vicoran offers Bluetooth temperature and humidity sensors with LCD displays and app connectivity, helping users monitor conditions locally or through a gateway.
Vicoran offers Bluetooth temperature and humidity sensors with LCD displays and app connectivity. Documented models include the V_STMT_A1 with a built-in sensor and the V_STMT_A2 with an external temperature probe; measurement capabilities vary by model.
Browse available instructions for Bluetooth pairing, alarm settings, temperature units, factory resets, and battery replacement. The manual identifies VOLCORA as the companion app and notes that monitoring beyond Bluetooth range requires a gateway.
Match the model number on your device to the manual before following setup instructions.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The available manual covers the V_STMT_A1 with a built-in sensor and the V_STMT_A2 with an external temperature probe. Check your device's model number before using the instructions.
The manual specifies the VOLCORA app. Turn on the sensor, enable Bluetooth on your phone, and keep the phone within 2 meters. In the app, tap +, select the sensor, and scan its rear QR code, or use Nearby Devices.
Without a connected gateway, the app can only display data near the sensor. The manual states that remote monitoring requires a gateway.
Open Settings from the app's home page to adjust temperature and humidity alarm limits where supported. Advanced settings include temperature units and alarm and notification intervals.
No official warranty or registration page is confirmed in the available information. Check the documents included with your product or contact the seller for assistance.