VELBUS is a highly reliable modular home automation system operating on a decentralized architecture for smart home comfort, safety, and energy savings.
VELBUS is a reliable modular home automation system based on a decentralized architecture without a central unit. Interconnection is handled via a 4-wire bus cable (two for power and two for data), making the system exceptionally simple and stable.
A minimal setup requires only two basic modules—input and output—to seamlessly translate outside information from pushbuttons, switches, and sensors into automated commands. Designed for professional installers and smart home makers, Velbus offers solutions that integrate easily with modern IoT platforms like Home Assistant. Velbus is a Belgian brand developed and produced by Velleman Group NV, boasting over 50 years of expertise in electronics.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
You can download the latest version of Velbuslink directly from the official website at https://www.velbus.eu/downloads.
To reset your Signum IoT Gateway, press and hold the reset button located on the device for 10 seconds until all LEDs flash simultaneously, then release.
Velbus recommends using a solid core EIB/KNX grade cable with a 4x 0.8 mm diameter. Do not use stranded wire cables or ethernet cables.
In addition to the standard 2-year warranty, you can get an 8-year extended warranty on your Velbus installation by registering it online (excluding power supplies and the Signum IoT gateway, which carries a 5-year warranty).