VanGuardian offers pre-emptive vehicle and asset alarm systems designed to protect trade vans, motorhomes, and commercial vehicles against theft and damage.
VanGuardian specializes in highly responsive, pre-emptive vehicle alarm systems designed to deter crime and protect vulnerable areas of trade vans, motorhomes, and commercial vehicles.
Utilizing advanced tri-axial accelerometers and microchip technology, VanGuardian alarms can detect minimal contact while ignoring wind and environmental factors. These visible and audible deterrents are easy to install, battery-powered, and customizable with seven levels of sensitivity to prevent false alarms, ensuring comprehensive security for doors, locks, and externally stored assets.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
To adjust sensitivity, press and hold the DISARM button until you hear a double beep. Press the ARM button to cycle through the 7 sensitivity levels, then press DISARM to set the desired level.
Replace the alarm batteries if performance notably decreases or you hear a 'Du...Du' sound when armed. Remote batteries should be replaced if the LED dims or the wireless range shortens.
To stop the alarm or exit ARM mode, press the UNLOCK/DISARM button on the remote once. If false alarms persist, try lowering the sensitivity by 1 or 2 levels.
Use the removal tool to lift the cover plate and remove the base. Pull the tabs to power up the electronics, clean the mounting surface with the provided 3M wipe, peel off the adhesive backing, press firmly, and reattach the cabinet.