Unitree Robotics is a global leader in high-performance quadruped and humanoid robots, providing advanced robotic solutions for consumer entertainment, education, and industrial research.
Unitree Robotics (Hangzhou Yushu Technology Co., Ltd.) is a pioneering high-tech company specializing in the development and manufacture of agile quadruped and humanoid robots. Renowned for their flagship "robot dogs" like the Go2 and B2, as well as the G1 humanoid, Unitree combines cutting-edge motion control, 4D LiDAR perception, and AI-driven navigation to create robots that are both powerful and accessible.
Their products serve a wide range of applications, from educational research and automated inspection to consumer companionship and entertainment. With a commitment to making intelligent robots a part of everyday life, Unitree continues to innovate in the field of mobile robotics.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
You can find the latest User Manuals, SDKs, and firmware updates at the Unitree Robotics Download Center located at https://www.unitree.com/download.
To calibrate, hold the remote without touching the joysticks. Press and hold buttons F1 and F3 for over 3 seconds until you hear a beep on the remote. Rotate the joysticks fully several times until the beeping stops, indicating calibration is complete.
A flashing red light typically indicates a system abnormality or calibration failure. A low flash rate often means a system hardware failure requiring after-sales contact, while a fast flash rate may indicate Motor & IMU calibration failure.
For technical inquiries and after-sales service, you can email support@unitree.cc or visit the Unitree Global Service Console to submit a ticket.