Tronics Manuals & User Guides
Tronics offers GYPRO gyroscopes, AXO accelerometers, evaluation boards and software tools for engineers testing angular rate, linear acceleration and sensor performance.
About Tronics manuals on Manuals.plus
Tronics provides GYPRO gyroscopes, AXO accelerometers, evaluation boards and software for inertial sensor testing.
Browse evaluation kit quick-start guides, board manuals and Tronics Evaluation Tool instructions covering Arduino setup, firmware, connections, data acquisition and self-tests.
Match the manual to your sensor model and board revision, and review all handling and programming precautions before use.
Tronics manuals
Selected manuals from manuals+ curated for this brand.
tronics Evaluation Tool Software User Manual
Tronics-EVB3 Development Boards User Manual
tronics EVB3 Development Boards User Manual
Tronics Evaluation Tool Software User Manual: GYPRO® and AXO® Sensors
Tronics-EVB3 User Manual: Evaluation Board for GYPRO and AXO Sensors
Tronics support FAQ
Common questions about manuals, registration, and support for this brand.
-
Which Tronics manuals are available in this category?
Resources include the MCD010 evaluation kit quick-start guide, EVB3 board manuals and the Tronics Evaluation Tool software manual. Match the document to your sensor and board revision.
-
Where can I find Tronics software and sensor datasheets?
The manuals direct users to the GYPRO and AXO product pages on the official Tronics website for datasheets, evaluation software, Arduino firmware and related documentation.
-
What do I need to set up a Tronics evaluation kit?
The supplied quick-start guide specifies a compatible GYPRO or AXO evaluation board, header connectors, an Arduino Leonardo or Yùn Rev. 2, a Micro-B USB cable and a Windows computer. Follow the guide for your board revision.
-
How do I contact technical support for an evaluation kit?
The manuals list TEG-ECR-support@tdk.com for evaluation kit assistance. The Evaluation Tool's Others tab can generate three debug files to send with your issue description.
-
Can calibration settings be changed freely?
No. The software manual warns that MTP programming is irreversible and programming opportunities are limited. Consult the sensor datasheet before writing calibration or compensation coefficients.