Thermapen produces professional-grade, high-speed digital thermometers, such as the Thermapen ONE and Classic, renowned for delivering accurate readings in seconds for culinary and industrial use.
Thermapen is a premier brand of high-performance thermocouples and digital thermometers, manufactured by Electronic Temperature Instruments Ltd (ETI) in the United Kingdom and distributed globally. Widely considered the gold standard in professional kitchens and home cooking, Thermapen instruments—including the Thermapen ONE and Thermapen Classic—are celebrated for their unrivaled speed, precision, and build quality. The devices utilize advanced thermocouple technology to provide accurate temperature readings in as little as one second, ensuring food safety and culinary perfection.
Beyond the kitchen, Thermapen offers specialized instruments for surface and air measurements. The products are designed with user-friendly features such as auto-rotating displays, motion-sensing wake modes, and robust waterproof or splash-proof casings. Each unit is hand-calibrated to traceable national standards, reflecting the brand's commitment to reliability and excellence in temperature instrumentation.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
'Lo' indicates that the measured temperature is below the instrument's range, while 'Hi' indicates it is above the range. Ensure the probe is being used within its specified temperature limits.
The Thermapen ONE is waterproof and can survive short-term submersion. The Thermapen Classic is not waterproof and should not be submerged; verify your specific model's rating before cleaning.
When the battery symbol appears, remove the battery cover using a coin or screwdriver (depending on the model). Replace the batteries ensuring positive side up, then secure the cover. Do not over-tighten.
The 'Err' message typically indicates a fault with the probe. If this error persists, contact the service department for repair or assistance.
Clean the instrument regularly with an anti-bacterial probe wipe to prevent bacterial growth. Avoid using solvents or submerging non-waterproof models.