terneo makes thermostats and heating controllers for underfloor heating, boilers, convectors and snow-melting systems, helping users manage temperature and comfort.
terneo is a heating-control brand from DS Electronics, offering thermostats for underfloor heating, convectors, boilers and snow-melting systems.
Browse terneo manuals for installation, sensor connections, temperature settings and troubleshooting. Features and wiring vary by model, so match the guide to the model shown on your device.
Mains-powered installation should be handled by a qualified electrician. For service, consult your product manual and the official warranty information.
Selected manuals from manuals+ curated for this brand.
Upload your terneo manual to help other users find installation and operating instructions.
Common questions about manuals, registration, and support for this brand.
Match the model name on your thermostat or packaging to the manual title. Use that model's guide because wiring, sensors and settings differ between products.
The supplied manuals specify installation by a qualified electrician. Follow the exact model's wiring diagram, load limits and electrical protection requirements.
The supplied manuals list the DS Electronics service center at +380914819181 and support@dse.com.ua. You can also contact your local distributor or the store where you purchased the device.
Reset procedures vary by model. Several digital models use a three-button hold until dEF appears, but the required duration differs. Check your model's manual before resetting.
The supplied manuals describe a 36-month warranty from the date of sale, provided the instructions are followed. Check the official warranty page and your product documentation for applicable terms.