📘 TEGERA manuals • Free online PDFs

TEGERA Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for TEGERA products.

Tip: include the full model number printed on your TEGERA label for the best match.

About TEGERA manuals on Manuals.plus

User Manuals, Instructions and Guides for TEGERA products.

TEGERA manuals

Latest manuals from manuals+ curated for this brand.

TEGERA 414 Synthetic Leather Glove Instruction Manual

December 15, 2025

TEGERA 414 Synthetic Leather Glove Specifications Standard Compliance: EN ISO 21420:2020, EN 388:2016+A1:2018, EN 407:2020 Size Range (EU): 8, 9, 10, 11 Outer Material Specification: Polyurethane, polyester, nylon EU-Type Examination…

TEGERA 8833 Synthetic Glove Instruction Manual

December 4, 2025

TEGERA 8833 Synthetic Glove Instruction Manual Synthetic glove, winter-lined, latex, fully dipped, double-dipped, sandy finish, cut resistance level A, acrylic, polyester, Cat. II, grey, orange, withstands contact heat up…

TEGERA 8815R Protective Gloves Instruction Manual

November 29, 2025

INSTRUCTIONS FOR USE PRODUCT SPECIFIC INFORMATION ONLY ON THIS PAGE TEGERA® 8815R Cut resistant glove, nitrile foam, palm-dipped, foam grip pattern, cut resistance level F, CRF® Omni Technology, HPPE, nylon,…

TEGERA 879 Synthetic Glove Instruction Manual

November 27, 2025

TEGERA 879 Synthetic Glove PRODUCT USAGE INSTRUCTIONS DECLARATION OF CONFORMITY Carefully read these instructions before using this product. www.ejendals.com/conformity EXPLANATION OF PICTOGRAMS 0 = Below the minimum performance level for…

TEGERA 8151 Leather Glove Instruction Manual

November 12, 2025

TEGERA 8151 Leather Glove Carefully read these instructions before using this product. EXPLANATION OF PICTOGRAMS 0 = Below the minimum performance level for the given individual hazard X= Not submitted…

TEGERA 432 Protective Gloves Instruction Manual

September 18, 2025

TEGERA 432 Protective Gloves Instruction Manual OUTER MATERIAL SPECIFICATION Polyurethane INNER MATERIAL SPECIFICATION HPPE (High performance polyethylene), elastane, nylon SIZE RANGE (EU) 5,6,7,8,9,10,11 EU-TYPE EXAMINATION (MODULE B) ISSUED BY NOTIFIED…

TEGERA 909V Protective Gloves Instructions

September 12, 2025

909V Protective Gloves Instructions 909V Protective Gloves Cut resistant glove, PU, palm-dipped, smooth finish, cut resistance level B, 18 gg, Dyneme® fiber from bio-circular feedstock, nylon, spandex, Cat. II, grey,…

TEGERA 457R Sustainable Glove Range Instruction Manual

September 9, 2025

INSTRUCTIONS FOR USE PRODUCT SPECIFIC INFORMATION ONLY ON THIS PAGE TEGERA® 457R 457R Sustainable Glove Range Cut-resistant glove, nitrile foam, water-based PU, palm-dipped, foam grip pattern, cut resistance level C,…

TEGERA 863R Protective Gloves Instruction Manual

June 4, 2025

TEGERA 863R Protective Gloves PRODUCT INFORMATION Carefully read these instructions before using this product. EXPLANATION OF PICTOGRAMS 0 = Below the minimum performance level for the given individual hazard X…

TEGERA 515 Protective Gloves User Manual

June 3, 2025

INSTRUCTIONS FOR USE PRODUCT SPECIFIC INFORMATION ONLY ON THIS PAGE TEGERA® 515 Synthetic leather glove, unlined, synthetic leather, polyester, Cat. II, black, green, reinforced index finger, elasticated 180°, for fine…

TEGERA® 4640R Textile Gloves: Product Information, Safety Standards, and Usage Guide

Product Information Sheet

Detailed product information for TEGERA® 4640R textile gloves, including EN ISO 21420 and EN 388 safety standards, food contact suitability, usage instructions, care, and allergen information.

Tegera 888 Leather Gloves - Safety and Usage Instructions

Instruction Manual

Comprehensive instructions for the Tegera 888 leather work gloves, detailing product specifications, safety standards (EN 420, EN 388, EN 407), usage guidelines, care, and allergen information.

TEGERA® 43001 Cut Resistant Gloves - User Instructions and Specifications

Instruction Manual

Detailed instructions, safety information, performance standards (EN 388, EN ISO 21420), material specifications, and care guidelines for TEGERA® 43001 cut-resistant gloves, designed for fine assembly work.

TEGERA® 790 Gloves: User Instructions and Safety Information

instruction

Comprehensive user instructions for TEGERA® 790 textile gloves. Covers general safety, fitting, storage, care, disposal, and allergen information. Certified for minimal risks according to EU 2016/425.

TEGERA® 84501 Disposable Nitrile Gloves: Chemical & Food Contact Protection

Instruction manual

The TEGERA® 84501 is a Category III disposable nitrile glove offering protection against chemicals and microorganisms, approved for food contact, and designed for precision work. Latex-free, waterproof, and oil/grease resistant.

TEGERA 8804r Nitrile Foam Gloves: Safety, Performance & Usage Guide

Product Information Sheet

Detailed information on TEGERA 8804r nitrile foam gloves, including EN 388, EN 407, EN 420 certifications, performance levels, usage instructions, care, and allergen information.

TEGERA® 457R Cut Resistant Gloves - Safety and Performance Guide

instruction manual

Detailed instructions and performance specifications for TEGERA® 457R cut resistant gloves, covering thermal and mechanical protection, fitting, care, and safety information.

Tegera® 801 Synthetic Gloves - User Instructions and Technical Specifications

Instruction Manual

Comprehensive instructions and specifications for Tegera 801 synthetic gloves by Ejendals. Details on mechanical risk protection, electrostatic properties (ESD), EN standards compliance, material specifications, fitting, care, and disposal for precision…

Tegera 7361 Chemical Protection Gloves: Technical Specifications and Usage Instructions

Technical specification

Detailed technical specifications and usage instructions for Tegera 7361 chemical protection gloves. Features include nitrile construction, heat resistance up to 100°C, food handling approval, and compliance with EN ISO 21420,…

TEGERA® 8807R Protective Gloves: Instructions for Use and Technical Specifications

Manual

Comprehensive instructions and technical specifications for TEGERA® 8807R cut-resistant gloves, detailing performance standards (EN 388, EN 407, EN 420), food contact suitability, dermatological testing, usage, care, storage, and allergen information.…

TEGERA 811 Synthetic PU Gloves: User Instructions and Safety Information

Instruction Manual

Detailed instructions for use, safety information, and technical specifications for TEGERA 811 synthetic PU gloves. Covers protection levels, electrostatic properties, fitting, storage, care, and disposal.