Tagra specializes in professional-grade LED lighting solutions, including neon flex, pixel tubes, and high-performance LED drivers for commercial use.
Tagra provides innovative and professional LED lighting solutions, offering a comprehensive range of products such as LED Neon Flex, Pixel Tube Lights, and constant voltage LED drivers. Known for their durability and performance, Tagra products cater to both indoor and outdoor applications with versatile solutions ranging from IP20-rated indoor drivers to IP68 waterproof neon tubes.
Designed for seamless integration into architectural and commercial lighting projects, Tagra's advanced control systemsāincluding SPI RF remote controllers and DMX decodersāallow for ultra-sensitive RGB and RGBW color adjustment, as well as highly customizable dynamic lighting effects. With a focus on quality and safety, their professional drivers and fixtures are built to comply with stringent wiring and building regulations, ensuring reliable and long-lasting illumination.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
You can match it via the controller's Match key (short press the match key, then the on/off key on the remote) or via Power Restart (switch power off/on, then short press the on/off key 3 times).
Yes, you can cut the flex using a pipe cutter, but only on the marked cut points. After cutting, ensure the ends are properly sealed with silicone and end caps to maintain their IP rating.
Check that the IC type setting on your controller matches the IC type of the LED tube or flex. Also, ensure the GND of each unit is properly connected to the GND on the controller.
The maximum length of the output cable to the light source should not exceed 2 meters to meet EMC standards. If a longer signal run is needed for data, use an amplifier.