SYNCHRO manufactures wireless remote controllers, control boxes, and motorized electronic components designed for adjustable bed bases and ergonomic furniture.
SYNCHRO, officially operating under SYNCRO Corporation and trademarked by The Orion Global Group, LLC, specializes in electronic control systems. They are well-regarded for producing high-quality wireless remote controllers and control boxes used in adjustable bed bases and ergonomic furniture. Their systems integrate seamlessly with motorized bases to provide features like Zero Gravity (ZG) positioning, anti-snore adjustments, memory presets, and targeted head or foot elevation.
Committed to satisfying customer requirements, SYNCHRO continuously improves the quality and environmental footprint of its electronics. Through stringent management systems and compliance with legal standards, they minimize their impact on the environment while maximizing product reliability and comfort for consumers.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Plug the bed base into a power source and press the Pairing/Program button on the control box for about 1 second until the pairing lamp flashes. On the remote, press and hold the 'SW' button until the backlight flashes, then press and hold 'HEAD UP' (or 'BACK UP' depending on your model) until the backlight stays solid. A beep from the control box confirms successful pairing.
First, replace the three AAA batteries in the remote. If it still does not work, repeat the remote pairing process with the control box. Also, verify that the bed's base is properly plugged into a working power source.
First, adjust the bed to your desired position. Press and hold the 'SW' button for 3 seconds until the backlight flashes, then press the desired memory button (such as TV or ZG) until the backlight turns solid. Your new position is now saved.
The ZG button stands for Zero Gravity. It automatically adjusts the bed base into a preset position that elevates your head and feet, designed to reduce pressure on your lower back and simulate weightlessness.
