Soildrops provides AI-powered smart irrigation systems and wireless soil moisture sensors designed to optimize water usage and outdoor plant care.
Soildrops is an innovative technology brand focused on modernizing lawn, garden, and agricultural care through advanced smart irrigation systems. The brand's signature offerings include AI-powered Wi-Fi sprinkler controllers and wireless soil moisture sensors that work together to remove the guesswork from watering.
By leveraging real-time environmental data, satellite information, and a comprehensive plant database, Soildrops systems automate watering schedules to maintain optimal plant health while conserving water. Designed for easy residential setup, Soildrops controllers can be installed without complex rewiring or trenching. Users simply manage their automated irrigation zones through the dedicated Soildrops mobile app to maintain precise daily moisture levels.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Keep the sensor near the controller and hold the sensor button for 5 seconds until the LED blinks. In the Soildrops app, tap 'Add sensor', scan the QR code located on the sensor, and wait for pairing confirmation.
For sprinkler zones, place the sensor in the center. For dripline zones, install it directly under a drip hole at the midpoint. Avoid placing the sensor next to concrete footings, rocks, or bricks, and try to select the highest point in the natural area.
Make sure the unit is plugged in, then press and hold the reset button for 5 to 7 seconds until the 3rd and 4th LED indicators begin flashing. This means the device is ready to pair again.
An initial 0% moisture reading is completely normal. Your app should display an accurate reading within 10 minutes. If no data appears after 10 minutes, try relocating the sensor to improve wireless signal strength.