SmartSetup Manuals & User Guides

SmartSetup offers smart home electronics including light switches, dimmers, wall outlets, Thread USB gateways and motorized blind controls.

Browse model-specific manuals for wiring requirements, Matter pairing, app integration, factory resets and troubleshooting. Compatibility varies by device, with documented support for platforms including Apple Home, Amazon Alexa, Google Home, SmartThings and Home Assistant.

Check your model number before following a guide and use a licensed electrician for mains-powered installations.

• How do I find the correct SmartSetup manual?

  Match the model number on your device or packaging to the manual title, such as HAUSB, WD02, M04 or MS0QDW. Wiring and reset instructions vary by model.

• How do I pair a SmartSetup Matter device?

  Follow the model-specific instructions to enter pairing mode, then scan its Matter QR code or enter its setup code in a compatible smart home app. Matter over Thread devices need a compatible Thread setup.

• How do I set up the HAUSB Thread USB gateway?

  In Home Assistant, install the OpenThread Border Router add-on, select the dongle's USB serial port and start the service. Then use the Thread integration to create or join your preferred Thread network.

• Do SmartSetup switches and outlets require a neutral wire?

  Requirements vary. The M04 outlet and documented MS0QDW switch require a neutral wire, while the WD02 dimmer supports configurations with or without neutral. Consult the exact wiring guide and use a licensed electrician.

• How do I reset a SmartSetup device?

  Use the procedure in your model's manual. Several switches and the M04 outlet use a roughly 10-second button hold, while the WD02 uses a different button sequence. A factory reset erases settings.

• Where can I get warranty or registration information?

  Check the documentation supplied with your product or ask the seller. A dedicated SmartSetup warranty or registration page has not been confirmed from the available information.