Sistemamt offers stage and event lighting, including LED bars, battery-powered fixtures and moving heads, with DMX control for programmable colors and effects.
Sistemamt lighting equipment includes LED bars, battery-powered fixtures and beam moving heads for stage, DJ and event applications.
Find model-specific manuals covering installation, DMX addressing, channel assignments, control-panel settings, charging and maintenance. Match the model number on your fixture before following setup instructions.
For repairs, spare parts or warranty assistance, contact your selling dealer with your model details and proof of purchase.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the model number on your fixture with the manual title, such as COLORBAR24, SMARTBAR615IP or HALOBEAM300. Channel layouts and settings differ between models.
Follow your model's manual to connect the DMX cables, select the channel mode and set the starting address. Match the controller configuration to the manual's channel table.
Its manual specifies an initial charge of 6–8 hours with the power switch and other switches turned off. Follow the charging instructions for your exact model.
Contact the selling dealer with the model number, proof of purchase and warranty card if supplied. Warranty conditions vary; the HALOBEAM300 manual specifies one year from purchase.
Check the exact fixture's rating and obtain clarification from the dealer if the instructions conflict. Some supplied manuals describe IP-rated models but also contain indoor-only warnings; do not assume outdoor suitability from the model name alone.