Shaft Manuals & User Guides

TOYOTA 1993 Propeller Shaft Installation Guide

June 6, 2026

TOYOTA 1993 Propeller Shaft Specifications Component Specification Shaft Runout 0.8 mm (0.031 in.) Spider Bearing Axial Play Less than 0.05 mm (0.0020 in.) Torque for Bolts and Nuts (4WD 3-joint…

Toyota Rear Axle Shaft Instruction Manual

June 6, 2026

Toyota Rear Axle Shaft Instruction Manual INSPECTION w/ ABS: REMOVE BEARING RETAINER (DIFFERENTIAL SIDE) AND ABS SPEED SENSOR ROTOR (a) Attach 4 nuts to the serration bolts and remove the…

TOYOTA SA-123 Rear Axle Shaft Instruction Manual

June 5, 2026

TOYOTA SA-123 Rear Axle Shaft Specifications Maximum shaft runout: 2.0 mm (0.079 in.) Maximum flange runout: 0.2 mm (0.008 in.) Torque for rear axle installation: 59 N–m (700 kgf cm,…

TOYOTA Tacoma Rear Axle Shaft Instruction Manual

June 5, 2026

TOYOTA Tacoma Rear Axle Shaft Specifications Component Specification Brake Line (2WD) 15 (155, 11) Torque (2WD) 8.0 (82, 71 in.·lbf) Oil Seal (2WD) 68 (700, 50) Brake Line (4WD and…

TOYOTA Tacoma FSM Front Drive Shaft Instruction Manual

June 5, 2026

TOYOTA Tacoma FSM Front Drive Shaft Product Specifications Front Wheel Torque: 110 N·m (1,150 kgf·cm, 83 ft·lbf) Drive Shaft Lock Nut Torque (w/o Free wheel hub): 235 N·m (2,400 kgf·cm,…

TOYOTA Tacoma Propeller Shaft Instruction Manual

June 5, 2026

TOYOTA Tacoma Propeller Shaft Specifications Component Torque Flange Nut 181 N·m (1,850 kgf· cm, 134 ft·lbf) Re-Torque Nut 69 N·m (700 kgf· cm, 51 ft·lbf) Propeller Shaft Nuts 74 N·m…

TOYOTA MT-28 Tacoma Output Shaft Instructions

June 4, 2026

TOYOTA MT-28 Tacoma Output Shaft Instructions OUTPUT SHAFT COMPONENTS

TOYOTA 2003 Tacoma Output Shaft Instruction Manual

June 4, 2026

TOYOTA 2003 Tacoma Output Shaft Specifications Output Shaft Flange Thickness: Minimum: 4.80 mm (0.1890 in.) Output Shaft Journal Outer Diameter: 1st gear (A): 38.979 mm (1.5346 in.) 2nd gear (B):…

TOYOTA RM1002U 2003 Tacoma Output Shaft Instruction Manual

June 4, 2026

TOYOTA RM1002U 2003 Tacoma Output Shaft Specifications Gear Thrust Clearance: Standard: 0.10–0.25 mm (0.0039–0.0098 in.) Maximum: 0.30 mm (0.0118 in.) Gear Radial Clearance: 1st and 2nd gears: Standard: 0.009–0.060 mm…

TOYOTA RM1002U 2003 Tacoma Front Drive Shaft Instruction Manual

June 4, 2026

TOYOTA RM1002U 2003 Tacoma Front Drive Shaft COMPONENTS The diagram above illustrates the components of the front drive shaft for a 4WD system. Key components include: Drive Shaft Inboard Joint…

SHAFT Vibrating Sheath User Manual: Features, Specs, How-To Guide

User Manual

Comprehensive user manual for the SHAFT Vibrating Sheath Model F. Learn about its FLEXISKIN™ material, vibration modes, waterproof design, charging, cleaning, safety precautions, warranty, and liability information.