A library of user manuals and setup guides for various generic, white-label, and unbranded smart cameras, IP security systems, and surveillance devices.
This category acts as a central resource for user manuals, instructions, and configuration guides covering a wide range of generic and unbranded camera products. These devices are often distributed under various names or simply identified by model numbers such as S20, X50, WQJ816, or generic terms like "Smart Camera" and "HD IP Camera." The products listed here primarily include Wi-Fi security cameras, PTZ (Pan-Tilt-Zoom) surveillance units, battery-operated outdoor cameras, and hidden mini cameras.
Because these cameras are frequently white-labeled, they often utilize common third-party mobile applications for remote viewing and control, including iCSee, Neye3C, HDWifiCamPro, and VideoLink. The documentation provided covers essential setup procedures such as pairing with mobile apps via QR codes, connecting to 2.4GHz Wi-Fi networks, configuring storage on SD cards, and performing factory resets. Whether you are troubleshooting connection issues or looking for default passwords (commonly 123456 or admin), these guides provide the technical details needed to operate these versatile surveillance devices.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
This category includes manuals for generic and white-label cameras that often use apps like iCSee, Neye3C, HDWifiCamPro, and VideoLink.
Common default credentials for these cameras are often username 'admin' with password '123456', 'admin', or simply left blank. Always check the specific manual for your model.
Most generic smart cameras only support 2.4GHz Wi-Fi networks. Ensure your phone is connected to the 2.4GHz band of your router during setup, as 5GHz networks are typically not supported.
Locate the reset button (often a small pinhole or a button on a cable). Press and hold it for 5-10 seconds while the device is powered on until you hear a voice prompt or see the lights flash, indicating a factory reset.