Scimagic-RC specializes in universal garage door remotes, receivers, and cloning duplicators compatible with major gate automation brands.
Scimagic-RC is a manufacturer and retailer of universal remote control solutions, focusing primarily on garage door and gate automation systems. The brand offers a wide range of multi-frequency remote controls capable of cloning both fixed and rolling codes from major manufacturers such as LiftMaster, Sommer, Hormann, and Marantec.
In addition to handheld transmitters, Scimagic-RC produces standalone receiver units and WiFi-enabled controllers that integrate legacy gate openers with smart home platforms like the Tuya App. Designed for versatility and cost-efficiency, Scimagic-RC products allow users to consolidate multiple remotes into a single device or retrofit older systems with modern wireless capabilities.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To clear existing codes, press and hold the top two buttons (typically A and B) simultaneously until the LED light flashes rapidly. Determine if fully cleared by pressing any button; the light should not remain on if the memory is empty.
Place your original remote and the Scimagic-RC duplicator side-by-side. Press and hold the button you wish to copy on the original remote, then immediately press and hold the corresponding button on the Scimagic-RC remote. Wait for the LED to flash steadily, indicating the code has been copied.
Yes, many Scimagic-RC models are designed to work with rolling code systems (such as 433.92MHz or 868MHz). However, after cloning the signal, you often must also press the 'Learn' button on your garage door receiver unit to finalize the pairing process.
Power on the receiver and ensure it is in pairing mode (LED flashing). Open the Tuya Smart App on your phone, select 'Add Device', and follow the prompts to connect the device to your 2.4GHz WiFi network. Once added, you can control the connected relay via the app.