ReShield overlay flooring panels are used to cover existing floors, with installation guidance covering substrate preparation, panel spacing, fastening and grounding.
ReShield overlay flooring panels are installed over existing flooring. Available documentation references ResinDek products and Cornerstone Specialty Wood Products, LLC.
Find installation guidance on substrate preparation, panel spacing, fastener selection and ESD grounding where applicable. Consult the instructions for your specific panel and floor construction before installation.
The supplied manual directs users to ResinDek for suitable fasteners and product assistance.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
It covers floor preparation, panel layout and spacing, fastener selection, and grounding requirements for applicable ESD flooring.
The supplied manual directs users to ResinDek at https://www.resindek.com/ and lists +1 513-772-5560 and the U.S. toll-free number +1 888-755-3048.
The available instructions specify a minimum 1/8-inch (3 mm) gap between panels and a perimeter gap of 1/4 to 1/2 inch (6 to 12 mm). Confirm these requirements in the instructions for your panels.
The supplied overlay instructions state that standard ResinDek screws will not work and advise contacting ResinDek for appropriate fasteners.
No dedicated warranty or registration page is identified in the available documentation. Ask ResinDek about applicable terms; the installation instructions warn that failing to use the specified metal spacers will void warranties.