📘 RAE Systems manuals • Free online PDFs
RAE Systems logo

RAE Systems Manuals & User Guides

RAE Systems, a Honeywell company, manufactures rapidly deployable, connected, and intelligent gas detection systems for industrial safety and emergency response.

Tip: include the full model number printed on your RAE Systems label for the best match.

About RAE Systems manuals on Manuals.plus

RAE Systems is a global leader in rapidly deployable, connected, and intelligent gas detection systems that enable real-time safety and security threat detection. Now a subsidiary of Honeywell Analytics, the brand offers a comprehensive portfolio of wireless gas detectors, radiation monitors, and software systems. These products are widely used by industrial organizations, first responders, and government agencies to monitor hazardous materials, volatile organic compounds (VOCs), and combustible gases.

The company’s product line includes personal, hand-held, and transportable monitors such as the ToxiRAE, MultiRAE, and QRAE series. RAE Systems instruments are designed to provide early warnings to toxic threats, ensuring worker safety in environments ranging from energy production to hazardous material spills.

RAE Systems manuals

Latest manuals from manuals+ curated for this brand.

RAE Systems RM6800 LoRa Module Owner’s Manual

July 13, 2026
RAE Systems RM6800 LoRa Module Introduction The RAE Systems RM6800 LoRa Module is a wireless communication component designed to provide long-range, low-power data transmission for compatible RAE Systems monitoring and…

RAE SYSTEMS RLM-3000 RAELink3 Transmitter User Guide

December 4, 2022
RAE SYSTEMS RLM-3000 RAELink3 Transmitter INSTALLATION INSTRUCTION The RAELink3 compact, portable radio-frequency modem provides long-range wireless communication between remote portable air monitors and a base station/computer for comprehensive monitoring. Up…

RAE SYSTEMS G02-0009-000 ToxiRAE Pro CO2 User Guide

September 28, 2021
ToxiRAE Pro CO2 QuickStart Guide RAE Systems, Inc. 3775 N. First St. San Jose, CA 95134-1708 USA Phone: 408-952-8200 Fax: 408-952-8480 Email: customerserv@raesystems.com www.raesystems.com WARNINGS Read Before Operating The ToxiRAE…

RAE SYSTEMS AutoRAE 2 Cradle User Guide

September 26, 2021
AutoRAE 2 Cradle Quickstart Setup Before using the AutoRAE 2 Cradle to bump test or calibrate, make sure the AutoRAE 2 Cradle and (if one is used) the AutoRAE 2…

RAE Systems video guides

Watch setup, installation, and troubleshooting videos for this brand.

RAE Systems support FAQ

Common questions about manuals, registration, and support for this brand.

  • What is the default password for RAE Systems monitors?

    For many RAE Systems monitors like the ToxiRAE Pro, the default password is '0000'. For older models like the ToxiRAE 3, the default may be '111'. Check your specific user guide if these do not work.

  • How do I perform a Fresh Air Calibration?

    Enter Programming Mode on your device and select 'Zero Calib' or 'Fresh Air'. Ensure you are in a clean air environment with 20.9% oxygen and no hazardous gases before confirming the calibration.

  • What does 'bAt' mean on the ToxiRAE display?

    The 'bAt' message indicates a low battery charge. You should charge the device immediately or replace the battery if it uses disposable cells.

  • How often should I bump test my gas detector?

    RAE Systems recommends performing a bump test (functional test) before each day's use to confirm that the sensors and alarms are responding correctly to gas.

  • What do I do if my sensor fails calibration?

    If a sensor fails calibration, check the gas cylinder expiration date and connections. Attempt calibration again. If it continues to fail, the sensor may need to be replaced.