📘 RAE Systems manuals • Free online PDFs
RAE Systems logo

RAE Systems Manuals & User Guides

RAE Systems supplies portable gas detectors, wireless monitoring equipment, and calibration stations to help users detect hazardous gases and maintain workplace safety.

Tip: include the full model number printed on your RAE Systems label for the best match.

About RAE Systems manuals on Manuals.plus

RAE Systems, also identified as RAE Systems by Honeywell, supplies gas detectors, wireless monitoring equipment, and automatic testing and calibration stations for workplace safety.

Find manuals for products such as QRAE 3, ToxiRAE Pro, and AutoRAE 2, with guidance on charging, setup, alarms, bump testing, calibration, and maintenance. Always use the guide for your exact model and follow its safety warnings before operating or servicing equipment.

RAE Systems manuals

Selected manuals from manuals+ curated for this brand.

RAE SYSTEM QRAE 3 Multi Gas Detector User Guide

August 1, 2025
RAE SYSTEM QRAE 3 Multi Gas Detector Specifications Model: QRAE 3 Operation: Diffusion & Pumped Manufacturer: RAE Systems by Honeywell Address: 1349 Moffett Park Drive Sunnyvale, CA 94089 USA Contact:…

QRAE II Quick Reference Guide

quick start guide
A comprehensive quick reference guide for the RAE Systems QRAE II gas detector, covering setup, battery charging, user interface, and calibration procedures for both diffusion and pump models.

ToxiRAE Pro CO2 User's Guide

manual
Comprehensive user guide for the ToxiRAE Pro CO2 personal wireless carbon dioxide monitor. Includes setup, operation, maintenance, calibration, and troubleshooting instructions.

QRAE II User's Guide

manual
Comprehensive user manual for the RAE Systems QRAE II multi-gas monitor, covering operation, maintenance, calibration, and troubleshooting for diffusion and pump models.

RAE Systems video guides

Watch setup, installation, and troubleshooting videos for this brand.

RAE Systems support FAQ

Common questions about manuals, registration, and support for this brand.

  • How do I choose the correct RAE Systems manual?

    Match the model name and configuration on your instrument to the guide. For example, QRAE 3 pumped and diffusion models have different calibration connections.

  • How can I contact RAE Systems technical support?

    The supplied product guides list RAE-tech@honeywell.com and +1-408-952-8200. Support hours are not specified.

  • What should I check before using an AutoRAE 2 station?

    Follow the model-specific guide to verify firmware, gas configuration, cylinder contents, adapters, and clock settings. The AutoRAE 2 Controller also requires an installed SD card.

  • What should I do if my detector fails a bump test?

    Follow the instrument's manual for calibration. The QRAE 3 guide advises replacing a sensor if it cannot be calibrated after a failed bump test. Do not use an instrument with nonfunctional alarms.

  • Where can I find RAE Systems warranty information?

    Honeywell provides a support article titled 'RAE: What is the warranty of RAE Products?' Consult its linked warranty statements for the terms applicable to your product.