R and D Instruments Manuals & User Guides
R and D Instruments offers coating thickness gauges and pinless moisture meters for checking metal finishes, wood, and building materials without damaging surfaces.
About R and D Instruments manuals on Manuals.plus
R and D Instruments offers handheld measuring tools, including the GM998 coating thickness gauge and the MT28C pinless moisture meter.
Find model-specific instructions for battery installation, measurement modes, calibration, and maintenance. These instruments support checks of metal coatings, wood, and building materials.
For unresolved faults or warranty questions, contact your supplier.
R and D Instruments manuals
Selected manuals from manuals+ curated for this brand.
R and D INSTRUMENTS MT28C Full Angle Non Contact Wood Moisture Meter User Guide
R and D Instruments support FAQ
Common questions about manuals, registration, and support for this brand.
-
Which R and D Instruments manuals are listed here?
Available guides include the GM998 coating thickness gauge and the MT28C pinless moisture meter. Match the model number on your instrument before following instructions.
-
How do I prepare the GM998 for measurement?
Install two AAA batteries, hold the gauge at least 5 cm away from metal, switch it on, and wait five seconds for initialization. Follow the manual for unit selection and calibration.
-
Does the MT28C need routine calibration?
The MT28C is factory-calibrated. Its guide advises against unnecessary calibration; consult the model-specific instructions before making reference adjustments.
-
Can the MT28C measure moisture in metal?
No. The MT28C uses capacitive sensing for materials such as wood, wallboard, and masonry, and is not suitable for metal or other conductive surfaces.
-
Who should I contact for repairs or warranty help?
Contact the supplier who sold your instrument. No verified brand support contact, warranty page, or registration page is available in the supplied information.