Q-LINE GO offers LED strips and solder-free supply connectors for profile-mounted lighting, with manuals covering installation, power requirements and safe use.
Q-LINE GO is an LED strip lighting range associated with Qlight, with documentation for LED strips and compatible solder-free supply connectors.
Find instructions for cutting, mounting, connection polarity and power supply selection. The documented strip has IP65 nano coating, but connector joints reduce protection to IP20; follow the relevant manual for installation and moisture protection requirements.
Consult your product manual for safety precautions and warranty terms.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Browse the Q-LINE GO manuals on this page and select the document matching your product. Manuals cover cutting, mounting, wiring and safety precautions.
The supplied manuals list Qlight at post@qlight.no and +47 905 11 849 for product enquiries.
The listed Q-LINE GO LED strip specifies 48V. Confirm your model's voltage and driver requirements in its manual before installation.
No. The manual states that using connectors reduces protection to IP20 at the connection point. Follow its additional sealing instructions for humid or outdoor installations.
The supplied manuals state a five-year warranty for normal use, subject to inspection and confirmation of a quality fault. Exclusions include misuse, disassembly, incorrect operation and severe physical damage. Consult your product documentation and supplier for applicable terms.