PUMPS provides a range of residential and industrial water management solutions, including heavy-duty sump and sewage pumps designed for flood prevention and waste removal.
PUMPS encompasses a selection of fluid displacement systems, specifically highlighting the Pro Series and Glentronics lines of sump and sewage pumps. Designed for reliability and safety, these products include models such as the ST Series (ST1033, ST1050) and E Series (E7040, E7055, E7105). The brand focuses on protecting properties from water damage through durable hardware that meets rigorous electrical frameworks.
Key features of these systems effectively include dual float controllers, battery backup compatibility, and robust horsepower options ranging from 1/3 HP to 1 HP. Whether for basement waterproofing or sewage transport, these pumps are engineered to handle demanding conditions. Manufacture and technical support for the listed specific models are provided by Glentronics, Inc.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
For the models listed (ST and E series), contact Glentronics technical support at 1-800-991-0466. Do not disassemble the product yourself.
No, do not use an extension cord. The electrical outlet should be within the length of the pump's power cord and at least 4 feet above the floor to minimize hazards.
Keep the pump's strainer or inlet distinctively clear of debris. It is also recommended to visually inspect the pump and test its operation by filling the pit with water designated intervals.
The horizontal discharge pipe must be sloped downward so any remaining water drains away. Failure to slope the pipe correctly can trap water, which may freeze and damage the pump.