Prolec provides excavator guidance and machine safety systems, including height and slew limits and lifting indicators, to support safe, accurate site operations.
Prolec supplies excavator guidance and construction machinery safety systems, including 2D guidance and PME 100–500 machine limit and lifting systems.
Browse user guides for job setup, reference settings, tool configuration and machine limits. Always use the manual matching your installed system: 2D target guidance is separate from PME safety limits.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Match the guide to your installed system and configuration. The listed documents include the 2D Guidance Quick Start Guide and PME 100–500 operating and limit-setting guides.
Email service@prolec.co.uk or call +44 1202 441000. Your local dealer can also assist with installed features and software activation.
The 2D Guidance guide describes the 2D Configuration menu and Job settings for references, bench heights, target depths and grades. Verify the settings on the main screen before digging.
No. The guide states that 2D targets are independent of PME limits. Motion cuts depend on the configured PME safety limits, not the 2D target depth.
The guide says to contact your local dealer about activating 2D Essentials through a software upgrade on an existing PME installation.
