PREWorks provides professional lighting technology, including DMX interfaces and LED control solutions for configuring and operating lighting installations.
PREWorks is an Austrian company associated with professional lighting and control technology, including DMX interfaces and LED control solutions.
Browse manuals and operating instructions for equipment such as the DSWG512 DMX-interface lighting controller. Documentation covers connections, DMX address programming, status indicators and technical specifications.
Check your equipment's model number before following setup instructions. Contact Preworks GmbH for additional product assistance.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for available PREWorks documentation, including the DSWG512 DMX-interface lighting controller owner's manual. Match the model number to your equipment.
The DSWG512 manual lists Preworks GmbH at office@preworks.at and +43 3463 82317. No support hours are provided.
It covers connection to a soft-LED dimming driver, DMX address allocation, LED status indications and technical specifications.
According to the manual, hold the switch for five seconds until the indicator turns red, then move the desired DMX channel from minimum to maximum twice. A green indicator confirms successful address programming. Consult the full manual before setup.
The available documentation does not identify a warranty or product registration page. Contact PREWorks or your supplier to confirm the terms applicable to your equipment.