PETER electronic manufactures soft starters, AC drives, DC brakes and motor controllers to manage industrial motor starting, stopping and speed while reducing stress.
PETER electronic manufactures industrial motor-control equipment, including soft starters, AC drives, DC brakes and motor speed controllers.
Browse manuals for VSII Plus and VersiStart II plus soft starters covering installation, wiring, commissioning, control settings and operating limits. Match each manual to the exact model and current rating.
Installation and adjustment must be performed by trained personnel following the product manual and applicable electrical safety requirements.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Match the model name, model number and current rating on the device label to the manual. VersiStart II plus instructions can differ by current range and model variant.
The instructions cover acceleration time, starting voltage, deceleration time, control connections, LED indicators and permissible starts per hour. Use the settings and limits specified for your model.
Installation and adjustment should be performed by trained personnel. Mounting and wiring must be done with the equipment de-energized and secured against unintended energizing; a stopped motor is not necessarily isolated from the mains.
Contact the manufacturer at mail@peter-electronic.com or +49 9189 41470. Include the model number and a description of the issue, or contact your supplying distributor.
Warranty information is available at https://www.peter-electronic.com/en/service/warranty/. Contact the manufacturer or your supplying distributor to confirm the terms applicable to your equipment.