OPEL LED covers car door welcome light projectors that display an Opel logo, with instructions for adhesive mounting, magnet placement, and basic product setup.
Find instructions for car door welcome light projectors listed under OPEL LED, including adhesive mounting and door-sill magnet alignment.
The available guide describes a 4.5 V LED projector with an ABS housing. Follow your product's instructions and ensure installation does not interfere with door movement.
Official Opel affiliation is not confirmed. Contact your seller for product-specific support and warranty information.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The available guide covers an OPEL LED car door welcome light projector, including product specifications, adhesive mounting, and magnet placement.
The guide says to clean the mounting area, remove the adhesive backing, and attach the light low on the car door without interfering with door opening. Place the magnet on the door sill aligned with the light.
The available instructions list a working voltage of 4.5 V. Check your own product documentation before choosing a power source.
The supplied information does not confirm official Opel affiliation or identify a separate OPEL LED manufacturer. Check the packaging and seller listing for manufacturer details.
No verified warranty, support, or registration page is available for this product label. Contact the seller using the details on your receipt or packaging.