OmniCure Manuals & User Guides

OmniCure® V3 LED Head for LX500 Technical Specification Guide LX500 UV LED Spot Curing Controller User Guide Excelitas Canada Inc. 2023 All rights reserved. OmniCure, and StepCure, are trademarks or…

OmniCure AC4 LED UV Curing System Specifications: Model Array Curing Width Part Numbers AC450 50 mm 019-00194R (365nm), 019-00191R (395nm) AC475 75 mm 019-00193R (365nm), 019-00192R (395nm) AC450P 50 mm…

OmniCure AC2 Series UV Curing Solutions Installation/Reference Guide Applicable for the following UV LED Head models: Model Array Curing Width Part Numbers AC275-365 75mm 019-00251R AC275-395 75 mm 019-00236R AC275F-365…

OmniCure S2000 Series Spot UV Curing System User Guide  https://www.excelitas.com/product/omnicure-s2000-spot-uv-curing-system Start Up Install the lamp module (see side 2). Plug the unit into a properly grounded AC outlet. Turn on…

OmniCure® S1500 Series Quick Start Guide Start Up Install the lamp module (see side 2). Plug the unit into a properly grounded AC outlet. Turn on the Power switch at…

OmniCure LX500 Series LED UV Curing Applicable for the following UV LED Head Controller models: Model Part Numbers LX500-2 V2 (supports up to two LED Heads) 010-00520R LX500-4 V2 (supports…

OmniCure LX50X Windows Control Panel User Guide Applicable for the following UV LED Head Controller models: Model Part Numbers LX500-2 V2 (supports up to two LED Heads) 010-00520R LX500-4 V2…

Get started quickly with the OmniCure S1500 UV Curing System. This guide covers setup, operation, and safety for Excelitas' S1500 model, including lamp installation, light guide setup, display modes, exposure…

A quick start guide for the OmniCure S2000 Series UV Curing System, covering setup, installation, and operation.