oe electrics Manuals & User Guides

oe electrics INSTR1294 QikDoc Locate Clamp Fix QIKDOC Locate Clamp Fix instructions Cutout Size Fit QIKDOC into surface Align clamp brackets with QIKDOC and screw into place using screws provided…

oe electrics QIKDOC Connect Screw Fix Instructions Horizontal Fitting Screw locations Required clearance  Fit brackets to QIKDOC using screws provided (a T10 Torx bit is required) Rear View Screw QIKDOC…

oe electrics INSTR1303 Connecting Shoe Panel Instruction Manual Inductions NOTE: M4F Connecting Shoe is used for Appliance Powering. Cutout Dimensions Single Connecting Shoe Align Connecting Shoe with cutout and snap…

QIKPAC M2F (Charging)Connecting Shoe Panel installation instructions INSTR1299 INSTR1299 Connecting Shoe Panel NOTE: M2F Connecting Shoe is used for Charging Applications Cutout Dimensions Single Connecting Shoe Align Connecting Shoe(s) with…

INSTR1300 QIKPAC CARRY Screen Mount installation instructions www.oeelectrics.com  INSTR1300 Qikpac Carry Screen Mount Fit the bracket onto a surface using 2 x No6 pan head screws. Screw type and length…

QIKPAC & QF5 TUF-R HP Removal instructions INSTR1288 www.oeelectrics.com QIKPAC Mobile Power Charger To remove align QikPAC and QF5 TUF-R HP removal tools with modules. QF5 removal tool slots into…

oe electrics INSTR1213 Connecting QikFit Modules and Power Supplies Instructions NOTE: Schuko QikFit shown. All QF modules connect similarly. Cut locking clip as shown below Using pliers remove both parts…

Detailed installation guide for the OE Electrics PRISM under-desk cable management and power solution, including dimensions, fixing instructions, and clearance requirements.

Step-by-step instructions for installing the OE Electrics QIKDOC Connect Clamp Fix system (INSTR1292), detailing cutout preparation, unit fitting, QIKPAC CARRY attachment, and GST08 cable connection.