Norseman specializes in robust industrial heating solutions, including high-quality explosion-proof convection panel heaters for hazardous environments.
Norseman is a recognized manufacturer specializing in industrial heating equipment, most notably their XB Series of explosion-proof convection panel heaters. Built to meet stringent CE and ISO 9001 standards, Norseman heaters are engineered for safety, reliability, and effective heat transfer in hazardous and demanding environments. Whether intended for floor or wall mounting, their heavy-duty designs are built to perform under pressure.
Here you will find a comprehensive library of user manuals, installation instructions, and maintenance guides for Norseman products. These documents provide essential information regarding safe installation practices, product specifications, clearance requirements, electrical wiring, and thermostat configurations to ensure safe and efficient continuous operation.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Disconnect the power supply and allow the unit to cool. Use a blast of compressed air to clean the heat sink, or wipe it down with a damp cloth or soft brush. Do not use water to clean the heater.
No, you must maintain at least 76 mm (3 inches) between adjacent heater extrusions and never install one heater directly above another.
Yes, Norseman XB CE heaters are approved for both wall and floor mounting. If wall mounting, ensure the wall can support up to 45 kg (100 lbs); otherwise, use the supplied brackets for floor mounting.
Maintain a preferred 300 mm (12-inch) clearance, and never less than 150 mm (6 inches) clearance in front of and at the sides of the heater for natural convection.