NeuroNexus Manuals & User Guides

NeuroNexus AVIH Unboxing and Implant Instruction Manual

December 13, 2023

NeuroNexus AVIH Unboxing and Implant Product Usage Instructions Unboxing Slowly lift the package and array up out of the holder and box, being mindful of the probe. Attach Package IST-2mm…

NeuroNexus AV256 Activus Probes Instructions

December 13, 2023

NeuroNexus AV256 Activus Probes installation Read this manual carefully before planning your surgery. This manual applies the following Packages: AV64, AVI64,AV128, AVI128, AV256 and AVI256 Examine the probe before opening…

NeuroNexus IST-CM Manual Insertion Tool User Guide

September 2, 2023

NeuroNexus IST-CM Manual Insertion Tool User Guide IST-CM A. Place the CM package carefully in the IST-CM Holder. B. While holding the package in place. Set clamp over the holder…

NeuroNexus X-Series X3-64 Unboxing and Implant Instructions

August 10, 2023

X-Series X3-64 Unboxing & Implant Instructions Created May 18, 2023 Read this manual carefully before planning your surgery. Examine the probe before opening the box. Make sure the probe hasn’t…

NeuroNexus SmartBox Pro Allego User Guide

December 1, 2022

NeuroNexus SmartBox Pro Allego Introduction Congratulations on your purchase of the SmartBox Pro/ Allego acquisition system! This advanced new system from NeuroNexus enables and accelerates neuroscience research through its unique…

NeuroNexus Radiens Allego Software User Guide

May 24, 2022

NeuroNexus Radiens Allego Software User Guide Introduction Congratulations on your purchase of Radiens Allego software! This advanced software from NeuroNexus enables mapping of neural, cardiac, and muscle activity while viewing…

NeuroNexus nDrive Sterilization Device User Manual

May 23, 2022

NeuroNexus nDrive Sterilization Device OVERVIEW Exploded View Assembled View Accessories Sterilization We highly recommend sterilization by soaking in an alcohol-based cleaning solution (10minutes maximum). Lower the entire assembly into the…

NeuroNexus IST-Motor Setup Instructions

May 23, 2022

NeuroNexus IST-Motor Setup INSTRUCTIONS:

NeuroNexus IST-nDrive User Manual

May 22, 2022

IST-nDrive User Manual IST-nDrive This user manual will show you how to prepare your probe and nDrive for implantation. Step 1 Prepare the nDrive, nDrive base, and IST-nDrive. Do not…

NeuroNexus SmartBox Pro Radiens Allego Software User Guide

May 22, 2022

NeuroNexus SmartBox Pro 1024 Lightning Fast Channels Introduction Congratulations on your purchase of the SmartBox Pro/ Radiens Allego acquisition system! This advanced  new  system  from  NeuroNexus  enables  and  accelerates  neuroscience…

NeuroNexus Radiens Allego Software Quick Start Guide

quick start guide

A quick start guide for NeuroNexus Radiens Allego software, covering installation, activation, interface overview, hardware connection, and basic streaming and saving procedures for neurophysiological data acquisition.

NeuroNexus IST Quick Guide: Assembly Instructions for Implantable Probes

quick start guide

This guide provides step-by-step instructions for the assembly and integration of NeuroNexus IST probe packages with stereotactic equipment. It covers models such as IST-CM, IST-Hybrid, IST-X3, and IST-AV series.

IST-Motor Setup Instructions - NeuroNexus

instruction manual

Step-by-step instructions for setting up the NeuroNexus IST-Motor, including connecting the headstage to the probe and adjusting orientation.

SmartBox Pro and Radiens Allego System Guide

Quick Start Guide

A comprehensive guide to setting up, installing, and using the NeuroNexus SmartBox Pro hardware and Radiens Allego software for neuroscience research, including system overview, software activation, and data streaming.