A category for generic and diverse IP-based network cameras, encompassing surveillance, dome, bullet, and wireless video monitoring devices.
Network cameras, also commonly known as IP (Internet Protocol) cameras, are digital video cameras used primarily for surveillance and security. Unlike traditional analog CCTV cameras, they can send and receive data directly via a computer network and the Internet without requiring a dedicated local recording device. This section encompasses user manuals, installation guides, network configuration tutorials, and troubleshooting instructions for various generic network cameras.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
A network camera, or IP camera, is a digital video camera that transmits data over a local area network or the internet, predominantly used for security and surveillance monitoring.
Typically, you must use the manufacturer's mobile app or connect via an Ethernet cable to its web interface, scan the camera's QR code (if applicable), and enter your local Wi-Fi credentials to bridge the device to your network.
PoE stands for Power over Ethernet. It allows a single network cable to provide both the data connection and electrical power to the camera, simplifying installation by eliminating the need for a separate power supply.
Locate the hardware reset button on the back, bottom, or inside the SD card slot of the camera. Press and hold it for 10-15 seconds while the camera is powered on. Wait for the device to reboot to restore factory defaults.