MyLiveCam is a WiFi camera app for viewing compatible cameras locally or remotely, with guides covering wireless setup, status indicators and device resets.
MyLiveCam is an app for viewing live video from compatible WiFi cameras, either locally through the camera's hotspot or remotely after WiFi setup.
Browse operating instructions for app installation, wireless configuration, LED indicators, charging and factory resets. Follow the instructions for your specific camera when setting up or troubleshooting a connection.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The available manual covers app installation, local and remote viewing, WiFi setup, LED indicators, charging and factory resets for the camera described.
The documented camera supports local viewing without an external internet connection. Connect your phone to its WiFi hotspot, whose name starts with PPIL, then open MyLiveCam and select the camera on the Device page.
Start with the camera connected in local mode. Open its WiFi settings in the app, choose your router's network and enter the password. The camera restarts and attempts to connect to that network.
For the camera described in the manual, hold the M button for three seconds and release it to restore factory settings. Wait approximately two minutes, then check your phone's WiFi list again. Confirm that these controls match your camera before resetting it.
No verified MyLiveCam warranty or registration page is provided in the available information. Check the documentation supplied with your camera or contact its seller.