MultiWAVE is a Make Noise eight-channel dual wavetable oscillator module for Eurorack synthesizers, offering independent audio outputs and flexible sound modulation.
MultiWAVE is an eight-channel dual wavetable oscillator from Make Noise for Eurorack modular synthesizers and the New Universal Synthesizer System, not a separate manufacturer.
Find instructions for installation, panel controls, channel activation and wavetable modulation. Each channel contains two oscillators, with eight independent audio outputs and shared controls.
For technical support or repair authorization, contact technical@makenoisemusic.com. Always switch off and unplug your Eurorack case before connecting or disconnecting module power cables.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
MultiWAVE is a dual wavetable oscillator module manufactured by Make Noise, rather than a separate brand.
The manual covers Eurorack installation, panel controls, channel activation, wavetable oscillators, Spread and Modulation Dissemination.
Switch off and unplug the Eurorack case. The module requires 26HP, 230mA at +12V and 5mA at -12V. Follow the manual and confirm that the power cable's red stripe aligns with the negative 12V connection on both the module and bus board.
Email technical@makenoisemusic.com with your question or request for return authorization before sending the module for service.
The supplied manual states a one-year limited warranty from purchase for defects in materials or construction, with proof of purchase required. Incorrect power connections, misuse and certain modifications are excluded; contact Make Noise to confirm coverage.
A separate MIDI Inlet manual is available at https://www.makenoise-manuals.com/multiwave-midi-inlet/multiwave-midi-inlet-manual.pdf. Use the manual matching your module or accessory.