multiLane Manuals & User Guides

multiLane ML4064-MCB-112 Host Test Board Owner’s Manual

November 4, 2024

multiLane ML4064-MCB-112 Host Test Board Owner's Manual Introduction The ML4064-MCB-112 is designed to provide an efficient and easy method of programming and testing 800G OSFP transceivers and active optical cables.…

multiLane 2024 Automated Transceiver LaneControl User Guide

September 13, 2024

LaneControl Installation | Features user guide User Manual Revision1.1.0, August 2024 Notices Copyright © MultiLane Inc. All rights reserved. Licensed software products are owned by MultiLane Inc. or its suppliers…

multiLane ML4079D 400G Bit Error Rate Tester User Manual

April 30, 2024

Pulsar | User Manual Installation | Connection | Calibration| Measurements User Manual revision 1.0 Notices Copyright © MultiLane Inc. All rights reserved. Licensed software products are owned by MultiLane Inc.…

multiLane Cooperative Lane Control Application User Manual

December 12, 2023

multiLane Cooperative Lane Control Application Product Information Specifications User Manual Revision: 1.0.0, November 2023 Acronyms: ML: MultiLane GUI: Graphical User Interface VID: USB Vendor ID PID: USB Product ID FW:…

multiLane ML4024 MSA Compliant MCB User Guide

September 25, 2023

multiLane ML4024 MSA Compliant MCB User Guide General description SFP28 Host (Small Form Factor 28) MSA Compliant Host board ML4024, is designed to provide an efficient and easy method of…

MultiLane ML4066 Analyzer OSFP User Guide

August 10, 2023

MultiLane ML4066 Analyzer OSFP Product Information User Guide: ML4066 CMIS Analyzer User Guide The user guide provides detailed information on the ML4066 CMIS Analyzer, including the CMIS Analyzer Board and…

multiLane AT4079B GUI Bit Error Ratio Tester User Manual

August 10, 2023

multiLane AT4079B GUI Bit Error Ratio Tester Product Information The AT4079B GUI User Manual is a user guide for the AT4079B Bit Error Ratio Tester. It is designed for testing…

multiLane ML4064 OSFP Host Test Board Instruction Manual

August 8, 2023

multiLane ML4064 OSFP Host Test Board Product Information OSFP Host Hardware Manual Rev 1.0 Table of Contents 4.1 Bootloader 5. OSFP HW Signaling Pins ML4064 test board key features [No…

multiLane AT4039E GUI Bit Error Ratio Tester User Manual

August 8, 2023

multiLane AT4039E GUI Bit Error Ratio Tester Product Information Product Name: AT4039E GUI User Manual Product Type: Bit Error Ratio Tester Features 4-Lane testing capability Supports data rates of 23-29…

multiLane AT4039D 4-Lane 23-29 GBaud Bit Error Ratio Tester User Manual

August 7, 2023

multiLane AT4039D 4-Lane 23-29 GBaud Bit Error Ratio Tester User Manual Notices Copyright © MultiLane Inc. All rights reserved. Licensed software products are owned by MultiLane Inc. or its suppliers…

ML4064-LB2-224 OSFP Electrical Passive Loopback Module Technical Reference

Technical Specification

Technical reference for the multiLane ML4064-LB2-224 OSFP Electrical Passive Loopback Module, detailing its features, specifications, I2C interface, memory map, and operational parameters for high-speed testing applications.

MultiLane ML4066 CMIS Analyzer User Guide

User Guide

This user guide provides comprehensive instructions for the MultiLane ML4066 CMIS Analyzer, detailing its features, software interface, and diagnostic capabilities for CMIS-compliant modules used in data center interconnects.

MultiLane ATE Twinning Frame Site Preparation Guide for Advantest V93000

Installation Guide

This guide provides essential site preparation information for installing the MultiLane High Speed I/O option, including air supply, software, power, and interconnect requirements for Advantest V93000 CTH and STH testers.

MultiLane ML4066 CMIS Analyzer User Guide

user guide

Comprehensive user guide for the MultiLane ML4066 CMIS Analyzer, detailing its features, software interface, I2C analysis, functional tests, memory mapping, and state machine testing for QSFP and QDD modules.

MultiLane ATE HSIO Card Cage Site Installation Guide

Installation Guide

Comprehensive guide for installing the MultiLane High Speed I/O (HSIO) Card Cage with Advantest V93000 CTH and STH testers. Covers system connections, power, air, and LAN setup.

MultiLane OSFP Host Hardware Manual

manual

This manual provides detailed information on the MultiLane OSFP Host Hardware, including key features, power-up procedures, operating conditions, LED indicators, bootloader access, and OSFP HW signaling pins.