Micronet Union is a global provider of reliable networking devices, specializing in Wi-Fi and GPON routers, terminals, and communication solutions.
Founded in 2015, Micronet Union (Micronet Union Technology (Chengdu) Co., Ltd.) is a global provider of network communication products and comprehensive connectivity solutions. The company prioritizes advancing Wi-Fi technologies through combinations like Wi-Fi with optical fiber cable, cellular base stations, and satellite communications.
Our database provides detailed user manuals, quick installation guides, and troubleshooting instructions covering a wide variety of Micronet Union products. Whether you are setting up an AX3000 Dual Band Wi-Fi 6 Router, configuring mesh networking, or installing XPON terminals like the X302 or X122, these manuals ensure optimal performance and safe equipment operation.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
You can find the default IP address (typically 192.168.10.1 or 192.168.1.1) along with the default SSID and login password printed on the information label located at the bottom or back of your router.
Ensure your primary controller router is fully configured with internet access. Plug in the second agent router, then press and hold the WPS button on the controller router for about 8 seconds until the LED flashes. Repeat the process on the agent router. Wait about 3 minutes for both LEDs to turn solid green indicating successful pairing.
To reset your device, press and hold the RESET button for more than 5 to 8 seconds depending on your model, and then release it. The LED will begin to blink or change color, indicating that the factory reset is in progress.
A blinking LOS (Loss of Signal) light means no optical signal is currently being detected. Check to ensure the fiber optic cable is securely connected to the PON port. If the issue persists, you should contact your Internet Service Provider.