MGC Manuals & User Guides

MGC-10 Multi Channel Dash Camera Installation Guide

March 6, 2025

MGC-10 Multi Channel Dash Camera Product Information Specifications Model: MGC-10 Multi-Channel Dash Camera Type: Dual Dash Camera Contact: (847) 296-279, sales@motorgc.com, www.motorgc.com Important Notice Before installation, please park the vehicle…

MGC MIX-4003-LF Low Frequency Sounder Base Installation Guide

February 5, 2025

INSTALLATION AND MAINTENANCE INSTRUCTIONS MIX-4003-LF LOW FREQUENCY SOUNDER BASE MIX-4003-LF Low Frequency Sounder Base CAUTION / ATTENTION DO NOT PAINT OR ALTER FACTORY APPLIED FINISH IN ANY WAY NE PAS…

MGC 400 Series Low Frequency Sounder User Manual

September 19, 2024

MGC 400 Series Low Frequency Sounder Product Usage Instructions Setting the DIP Switches Instructions on how to set the DIP switches for synchronized and non-synchronized operation. SW1 Settings Signal Rate:…

MGC SPPS-204 Series Strobe Wall Speaker Instruction Manual

August 21, 2024

MGC SPPS-204 Series Strobe Wall Speaker Specifications: Operating temperature  0⁰C to 49⁰C (32⁰F to 122⁰F) Humidity range 0% to 93% Strobe flash rate 1 Hz (1 flash per sec.)* Nominal…

MGC SPPS-104-25 Ceiling Speaker Strobe Instruction Manual

August 21, 2024

25 Interchange way, Vaughan Ontario. L4K 5W3 Phone: 905.660.4655; Fax: 905.660.4113 Web: www.mircomgroup.com INSTALLATION AND MAINTENANCE INSTRUCTIONS SPPS-104 SERIES [H] CEILING SPEAKER-STROBE SPP-104 SERIES CEILING SPEAKER CAUTION / ATTENTION DO…

MGC BB-4002R Back Box and Red Door Instruction Manual

August 17, 2024

BB-4002R Back Box and Red Door Specifications: Models: BB-4002R, BB-4006R Description: Multi Module Enclosures BB-4002R: Back Box and Red Door for 1 or 2 MIX-4000-M Series Modules BB-4006R: Back Box…

MGC DIFF-PRESSURE-KIT for MIX-4010-DUCT Photoelectric Duct Smoke Detector Installation Guide

August 2, 2024

MGC DIFF-PRESSURE-KIT for MIX-4010-DUCT Photoelectric Duct Smoke Detector Product Information Specifications Product Name: DIFF-PRESSURE-KIT for MIX-4010-DUCT Manufacturer: Mircom Group Address: 25 Interchange Way, Vaughan Ontario, L4K 5W3 Contact: Phone -…

MGC FS-400-RR-WP Weather Protected Wall Mount LED Strobe Installation Guide

March 17, 2024

MGC FS-400-RR-WP Weather Protected Wall Mount LED Strobe Description MGC’s FS-400-RR-WP Weather Protected Strobe is a robust and reliable solution designed to thrive in challenging environments. Crafted for outdoor installations,…

MGC SPP-204-WP Series Weather Protected Speaker/Strobes User Manual

March 7, 2024

MGC SPP-204-WP Series Weather Protected Speaker/Strobes User Manual About this Manual This manual is included as a quick reference for installation. For further information on the use of this device…

MGC 400-WP Series Weather Protected Notification Appliances Instruction Manual

March 1, 2024

MGC 400-WP Series Weather Protected Notification Appliances Product Information Specifications Operating temperature: - Humidity range: - Strobe flash rate: 1 Hz Nominal voltage: Regulated 24 VDC / 24 VFWR Operating…

MGC QAD-6425 Amplifiers Installation Guide

Installation Guide

Installation instructions for MGC QAD-6425-25V and QAD-6425-70V amplifiers, detailing how to install and remove modules from the QMB-6000 amplifier card cage.

MGC RA-1000 Series Remote Multiplex Annunciator Panels Installation and Wiring Manual

Installation and Wiring Manual

Comprehensive installation and wiring manual for the MGC RA-1000 Series Remote Multiplex Annunciator Panels, covering mechanical installation, wiring instructions, DIP switch settings, and specifications.

RAXN-LCDG Network Remote Graphic Annunciator Installation and Wiring Manual

Installation and Wiring Manual

Installation and wiring manual for the MGC RAXN-LCDG Network Remote Graphic Annunciator. This document provides detailed instructions for installation, configuration, wiring, and specifications of the device.

MGC RA-1000 Series Remote Multiplex Annunciator Panels Installation and Wiring Manual

Installation and Wiring Manual

This manual provides installation and wiring instructions for the MGC RA-1000 Series Remote Multiplex Annunciator Panels, including details on mechanical installation, wiring, DIP switch settings, and specifications.

MGC BB-4002R and BB-4006R Multi Module Enclosures: Dimensions and Wiring Guide

Installation Guide

Detailed dimensions, wiring diagrams, and cable routing instructions for MGC BB-4002R and BB-4006R Multi Module Enclosures, designed for MIX-4000-M Series Modules.

MGC ANC-6000 Audio Network Controller Board Installation Instructions

Installation Guide

Installation instructions for the MGC ANC-6000 Audio Network Controller Board, detailing module mounting, board layout, DIP switch configuration for addressing, and wiring for audio sources and paging microphones. Includes diagrams…

MGC RAXN-UB-BRACKET Installation Instructions: Module Mounting Bracket

Installation Guide

Installation guide for the MGC RAXN-UB-BRACKET module mounting bracket, detailing kit contents and assembly steps for mounting the RAXN-4000LCDGC module onto a fire alarm enclosure's inner deadfront chassis.

MGC SPPS-104 Series Ceiling Speaker-Strobe Installation and Maintenance Instructions

Installation Instructions

Installation and maintenance instructions for MGC SPPS-104 Series ceiling speaker-strobes and SPP-104 Series ceiling speakers. Includes specifications, wiring diagrams, mounting instructions, and sound/light ratings.

RB-MAM-3500 Replacement Main Display Installation Instructions for FX-3500 Fire Alarm Control Panel

Installation Guide

This document provides instructions for installing the RB-MAM-3500 Replacement Main Display kit for the FX-3500 Fire Alarm Control Panel. It includes a parts list and step-by-step guidance for powering down…