LUXLITE offers LED lighting controllers and RF remotes for adjusting brightness, RGB and RGBW colors, and white color temperature in compatible lighting systems.
LUXLITE products documented here include four-channel LED RF controllers and R8/R8-1 touch-wheel remotes for compatible LED lighting systems.
Browse manuals for wiring, power requirements, remote pairing, brightness and color adjustment, scene settings, and troubleshooting. Always match the instructions to your exact model before installation or configuration.
Selected manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
The available documentation covers a four-channel RGBW/RGB/CCT dimming LED RF controller and R8/R8-1 RGBW touch-wheel RF remotes. Match the manual to your exact product model.
The documented pairing method is to briefly press the receiver's Match key, then immediately press the remote's on/off or applicable zone key. An indicator flash confirms pairing. Consult the model manual for the alternative power-restart method.
They use a 3V CR2032 coin-cell battery. Remove the protective battery film before first use and follow the polarity markings. Keep new and used coin cells away from children.
The controller specifies a 12–24 VDC constant-voltage input. Check the manual's wiring diagram and current limits before connecting a compatible power supply and LED load.
The supplied controller and R8/R8-1 manuals list a five-year warranty. Confirm coverage, exclusions, and claim procedures with the seller; this should not be assumed to apply to every LUXLITE product.